www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: BANJO BOLTS  (Read 3909 times)

0 Members and 1 Guest are viewing this topic.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
BANJO BOLTS
« on: February 26, 2006, 01:18:24 PM »
I have loose one banjo bolts that tighteen the backplate of AN big sucker to the motor heads  >:(

Where can I find another?

I can't belive that I must buy another BIG SUCKER!  :-[

thank you
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: BANJO BOLTS
« Reply #1 on: February 26, 2006, 01:32:51 PM »
Have you tried calling Ness yet to see if you can get a another bolt.   Harley sells thier's and I was able to buy and extra from Zippers for their's cant imagine them trying to bone you for a whole setup to get one.

-harry
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: BANJO BOLTS
« Reply #2 on: February 26, 2006, 08:27:32 PM »
If you mean the newer two-piece mounting studs, I've got some extras in my garage, if you run up against a brick wall getting some let me know.You can also get them through Chicago H-D on line. Should be the same part number for all TWIN CAM models, but am not positive on that one. H-D part no. 29477-99A.
Joe
Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #3 on: February 27, 2006, 02:42:02 AM »
Quote
If you mean the newer two-piece mounting studs, I've got some extras in my garage, if you run up against a brick wall getting some let me know.You can also get them through Chicago H-D on line. Should be the same part number for all TWIN CAM models, but am not positive on that one. H-D part no. 29477-99A.
Joe

I can't find on line the item n. 29477-97A, what is this?  :'(
Logged

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: BANJO BOLTS
« Reply #4 on: February 27, 2006, 03:31:40 AM »
I'll paste the link to H-D accessories that has a note that references the bolts I believe you're referring to, they're down towards the bottom of the page. Says these are required is current mounting bolts are the one piece version, etc. Hope this doesn't muddy the waters further:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442101569&FOLDER%3C%3Efolder_id=2534374302287057&ASSORTMENT%3C%3East_id=2534374302287057&bmUID=1141028827678&bmLocale=en_US'\

Ciao,
Joe
Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #5 on: February 27, 2006, 05:18:48 AM »
Quote
I'll paste the link to H-D accessories that has a note that references the bolts I believe you're referring to, they're down towards the bottom of the page. Says these are required is current mounting bolts are the one piece version, etc. Hope this doesn't muddy the waters further:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442101569&FOLDER%3C%3Efolder_id=2534374302287057&ASSORTMENT%3C%3East_id=2534374302287057&bmUID=1141028827678&bmLocale=en_US'\

Ciao,
Joe

this link doesn't work!  [smiley=oops.gif]
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: BANJO BOLTS
« Reply #6 on: February 27, 2006, 08:36:42 AM »
This is the link, but those are not the hollow bolts that attach the backing plate to the breather ports in the head.
« Last Edit: February 27, 2006, 08:52:39 AM by grc »
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #7 on: February 27, 2006, 10:28:38 AM »
Quote
This is the link, but those are not the hollow bolts that attach the backing plate to the breather ports in the head.  http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442101569&FOLDER%3C%3Efolder_id=2534374302287057&ASSORTMENT%3C%3East_id=2534374302287057&bmUID=1141028827678&bmLocale=en_US

Joker - I think you will need to contact Ness for a replacement.  If I remember correctly, the Ness part is made differently than the Screamin' Eagle part.  Contact Ness and have them advise you, they should offer to just send you one, or they can tell you for sure if the H-D part will work.
email:   contact@arlenness.com

Jerry


just do it, I'm waiting the reply  [smiley=xyxthumbs.gif]
Logged

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: BANJO BOLTS
« Reply #8 on: February 27, 2006, 11:56:49 AM »
Joker,
I just looked up the Big Sucker kit in two catalogs, seems you are looking for one of the smaller drilled bolts for the vent,rather than the mounting studs for the backplate that I thought. My mistake. Seems I did not save the install instructions for this kit, but if you still have it and it has the Ness part number, they should help you get a replacement. If not post the part number here and one of us 'locals can go up and brow beat them a bit, they're about 30 minutes from the house. I still have the stock banjo bolts I removed, but as GRC says they a bit different than stock H-D.



Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #9 on: February 28, 2006, 02:38:27 AM »
Quote
Joker,
I just looked up the Big Sucker kit in two catalogs, seems you are looking for one of the smaller drilled bolts for the vent,rather than the mounting studs for the backplate that I thought. My mistake. Seems I did not save the install instructions for this kit, but if you still have it and it has the Ness part number, they should help you get a replacement. If not post the part number here and one of us 'locals can go up and brow beat them a bit, they're about 30 minutes from the house. I still have the stock banjo bolts I removed, but as GRC says they a bit different than stock H-D.


I don't have the instruction sheet. [smiley=oops.gif]

I'm waiting the reply from Arlen Ness... [smiley=nixweiss.gif]

In the AN site, if you "search" banjo comes out many banjo bolts (without picture)!  :'(

Logged

CVOJOE

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2884
  • Life's a journey, why not enjoy the ride?
Re: BANJO BOLTS
« Reply #10 on: February 28, 2006, 02:49:12 AM »
I sent them a request for a reaplacement install sheet, which normally has the parts breakdown. Which part number AN "Sukah" did you use on your ride? I may be able to get up there on Saturday or Sunday, see what I can get as a Plan B.

Ciao,
Joe
Logged
2003 FLHRSEI2. (Sold) :(

Horsepower is how fast you hit a wall.Torque is how far you will take the wall with you.

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #11 on: February 28, 2006, 05:42:37 AM »
Quote
I sent them a request for a reaplacement install sheet, which normally has the parts breakdown. Which part number AN "Sukah" did you use on your ride? I may be able to get up there on Saturday or Sunday, see what I can get as a Plan B.

Ciao,
Joe

My sucker is the number 18-501
for FLHT 2002 carb

thank You very much!
Logged

UK Dave

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 770
  • Born to be wild - well, for a few days at least
Re: BANJO BOLTS
« Reply #12 on: March 01, 2006, 04:08:33 AM »
 This is the PDF from Ness for the install and also lists the components (if I am actually able to post it...)

Cheers

Dave
Logged
If you're not living on the edge - you're taking up too much room!

joker1450

  • Newbie
  • *
  • Offline Offline
  • Posts: 37
  • FLHT 2002
Re: BANJO BOLTS
« Reply #13 on: March 01, 2006, 05:07:50 AM »
Quote
This is the PDF from Ness for the install and also lists the components (if I am actually able to post it...)

Cheers

Dave

[size=24]I love YOU[/size]

 [smiley=banana.gif] [smiley=banana.gif] [smiley=banana.gif]

 [smiley=xyxthumbs.gif] [smiley=xyxthumbs.gif] [smiley=xyxthumbs.gif]
Logged

UK Dave

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 770
  • Born to be wild - well, for a few days at least
Re: BANJO BOLTS
« Reply #14 on: March 01, 2006, 08:18:06 AM »
Hey - Steady there Joker - you will get us "Macho Europeans" a bad name ;)

Glad I could help

Cheers

Dave

Logged
If you're not living on the edge - you're taking up too much room!
Pages: [1] 2  All
« previous next »
 

Page created in 0.218 seconds with 21 queries.