Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[yellowsedeuce]

Iselbulls,

Those lites look awesome!  Jim sure is the master.  When I installed his lites on my SED it took me two days....( I didn't have Mike to clean the bike & I was changing every bolt to chrome that I couldn't reach with the tank on).  Still he's the master.  I may have to ride 400 miles just to have him add bling to my banana!

Yellowsedeuce

[The Bolvine Gigolo!]

Hey! Yellow
We did the same changed not all but most to Chrome bolts, I was the Gofher and Jim told me where to go and to get what
Hey! like Mike said lets make it a monthly thing ( A BLING PARTY )


 [smiley=cherry.gif]

[Twolanerider]

I understand that. Sometimes you just have to prioritize. Bling, bling is good, but isn

[The Bolvine Gigolo!]

OMG, I just realized something looking at the pics of the Lic. Frame.........

 Hey! Cigar
After a second look you did miss a spot, I'll be back up there next week and you can take care if it. [smiley=huepfenjump3.gif]






I missed a spot !!!!. Either that, or Jim touched it again after I left [smiley=behead.gif]

[The Bolvine Gigolo!]

But..........

[RJ749]

Hey! Twolane
The only problem with that is just about all the Hotties want Bling not the Bike Bling. There own Bling [smiley=huepfenlol2.gif]

Bling Queens, too high maintenance, don't deserve you guys.

[Twolanerider]

Bling Queens, too high maintenance, don't deserve you guys.

Amen.  Need to find a back seater or second seater with a proper sense of priority on such things   .


(hmmm, no wonder I'm still single?)

[ccr]

But..........

[RJ749]

OK, I'm no hottie, but I would never pick an oil pump over bike bling, and I have chosen bling for bikes over bling for me.

[WFP]

But on a Cold Early Morning last May in the Mountains of North Carolina/Tennesee, I bet MR. WE would have chosen a Loctited Tightened Compensator Nut over ANY Bling!

/Bill

OK, I'm no hottie, but I would never pick an oil pump over bike bling, and I have chosen bling for bikes over bling for me.

[cigarmike]

Jim, did you see this lift??, Did I mention that I also have a Concrete hole cutter???. Lets put one of these right next to the "Pit Lift" .

http://flhrsei.org/yabb2/Attachments/100_0352_001.JPG

Hey guys, In defense of the Lic. Plate Frame...its really a nice thick piece of metal, not just a cheap frame. . Once you hold it in your hand...you gotta have one. If it had come from MoCo, it would be $510.

[hd-dude]

Jim, did you see this lift??, Did I mention that I also have a Concrete hole cutter???. Lets put one of these right next to the "Pit Lift" .

http://flhrsei.org/yabb2/Attachments/100_0352_001.JPG

Hey guys, In defense of the Lic. Plate Frame...its really a nice thick piece of metal, not just a cheap frame. . Once you hold it in your hand...you gotta have one. If it had come from MoCo, it would be $510.

Yeah, I saw that one as well. Not to sure having the bike up in the air like that without a platform. Maybe I'll see if I can find one with a platform, then we'll give it a try.

The plate frame is top quality for sure, the brightness of the LED's is incredible. I have not see any that even come close to this one. I will be getting mine installed soon!

This thing not only adds bling but it also adds a safety factor as well [smiley=xyxthumbs.gif]

[Twolanerider]

OK, I'm no hottie,

Oh.......  So not true.  It simply goes without saying around here that MrsWe is an MB (Major Babe).

and I have chosen bling for bikes over bling for me.

[Fatboy]

The frame has about 3' of wires on it. I just ran them into the back of the tail light housing with the signal wires and shortened them up. For the connections I removed the pins from the connectors opened them up and soldered them in. This plate does take a bit of modifying to the stock plate holder to make it all work. Its easiest to remove the tail light bar and plate holder to make the mods.

These plate frames retail for $305.99, site members get the 10% discount. They come in a run/brake/signal, a 3 sided run/brake, or a run brake only. I will be modifying the 3 sided brake for run/brake/signal for my bike as I have the run/brake converter and red lenses on my signals.

---------------------------------------------------------
Jim,

 When I visited the Billet Boys booth at the V-twin Expo they showed me a new chrome billet offset bracket they had developed so when used

[hd-dude]

---------------------------------------------------------
Jim,

 When I visited the Billet Boys booth at the V-twin Expo they showed me a new chrome billet offset bracket they had developed so when used