Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[110tHunDer]

So every time I want to take the tour pak off, I'd have to remove the wire all the way up to near the battery?

[bostonut]

Thanks for the pics!

[WFP]

bostonut,

Thanks!  Looks like I planned ahead and didn't know it.  I already have the quick disconnect knob installed.  I think I will just us the harness connector for now.

/Bill

[110tHunDer]

I remember seeing some photos of a Tour Pak Spolier kit which someone had the pin stripped flames added to the Spoiler Light Kit.  I have seached and could not locate it.  Does anyone know where it is located? [smiley=nixweiss.gif]

[Twolanerider]

Bumped to the top for 05Rider.

I think this thread pre-dated my participation here but I must have scanned it along with everything else (tried to scan EVERYTHING at first, was too interesting) back at the beginning.  Must have seen your pictures though 103 as they had to have been my inspiration this past weekend.  Here's what a striper that H82lose happened to be familiar with did to the red bike on Saturday:

[Twolanerider]

And then, just to get a clue what an excellent salesman the guy was, when I came back from walking to another vendor to get a soda he asked how I liked this too.  I always though artwork on helmets was a little cheesey.  But I didn't tell him to take it off and it's kinda growin' on me....  [smiley=confused5.gif]

[Tonys]

Looking GOOD, two lane...is the striping tape and did he clearcoat over it?

[05Rider]

  103tHunDer, Thanks so much for those pictures.  I knew that I had seem them!!  [smiley=xyxthumbs.gif]
 Can you give me a ballpark figure on how much you were charged to have the pinstriping added to your spoiler.  So when I start to look for a stripper, at least I will have some idea on how much I will be paying.

[05Rider]

Looking GOOD, two lane...is the striping tape and did he clearcoat over it?

 I have the same question - Was that done with striping tape or painted by hand and then covered with a clear coat?? [smiley=nixweiss.gif]??

[Twolanerider]

[110tHunDer]

So when I start to look for a stripper, at least I will have some idea on how much I will be paying.

I can't help with how much you should be paying for a stripper, lol.  You might want to check with JC on that one, lol.  But, I paid about $100 to have my spoiler hand-striped and then clear-coated over.  IMHO, having the stripes cleared over is the only way to get a factory appearance and be sure the pinstriping will last the life of the rest of the paint/stripes.

[porthole]

Twolane,

Coul you email me a shot of how the bag bars look? I am considering the purchase but they are not in stock, so that means paying up front.
Also, are your bars the new style?
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442085867&FOLDER%3C%3Efolder_id=2534374302290799&ASSORTMENT%3C%3East_id=2534374302290799&bmUID=1112708544043&bmLocale=en_US

Thanks

[yellowsedeuce]

Two lane,

Those stripes on the spoiler & brain bucket look great.  Thanks for divulging your costs so the rest of us don't get hammered when we negotiating with pin-stripers.  Been too long since we hired a stripper, how much they run nowadays. LOL!

Yellowsed

[Twolanerider]

Twolane,

Coul you email me a shot of how the bag bars look? I am considering the purchase but they are not in stock, so that means paying up front.
Also, are your bars the new style?
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524442085867&FOLDER%3C%3Efolder_id=2534374302290799&ASSORTMENT%3C%3East_id=2534374302290799&bmUID=1112708544043&bmLocale=en_US

Thanks

Sure thing PortHole.

[Twolanerider]

Two lane,

Those stripes on the spoiler & brain bucket look great.