Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ordlord11]

 will a 21" tire and wheel fit on a 09 SEUC without modifications to the front fender? Also I'm thinking about going with Renegades anybody have any feedback?

[guppytrash]

Call and ask these guys

http://www.hogpro.com/showpage.php?page=main.htm

They will know if anybody.  I would ask also if it will have any impact on your ABS.
Good Luck and don't forget the pictures when you get it done.

[ordlord11]

Thanks I'll give them a call tomorrow

[twmartin1970]

Not sure about the ultra,, but my serg required a couple of brackets to raise the fender.  Renegade knew exactly what I needed.  They were good to do business with. 

[ordlord11]

did it change the way your bike handles? do you like it? would you recommended it

[Wheelsnkeels]

Better pricing at www.wanaryd.com

You drill the rear fender mounting hole to 3/8 and lift the rear as you tighten the fender. Then tape a vacuum hose to the center of the tire to check clearance. If it doesn't rub you are good to go. They also make a bracket to raise the fender but why waste the money if you don't have to?

[twmartin1970]

I think it rides great, but I have had 21's on all my touring bikes.

The SERG front fender is lowered.  Drilling the mounting hole bigger won't work.  Not sure about the ultra.

[2k]

I used the drill-out method on my '07 ultra and it worked great. Will do my '09UCSE as soon as I need a tire. I also used a Metzeler tire as I have been told they don't "grow" as much when they get hot.