Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: Here's what I wanna do any suggestions???  (Read 2817 times)

0 Members and 1 Guest are viewing this topic.

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Here's what I wanna do any suggestions???
« on: October 02, 2010, 09:57:08 PM »

Want to take the turn signals off the handle bars and relocate them on the forks next to the light, next remove those harley tear drop mirrors and have 1 mirror going the down swoop way. Last get a set of wild 1 chubby pull back risers. Also does anybody have any suggestions on what seat to buy that sits lower and back little further almost like a pocket. Any suggestions???
Logged

skippy

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1102
  • FLHRSEI.ORG
Re: Here's what I wanna do any suggestions???
« Reply #1 on: October 02, 2010, 10:10:02 PM »

As for the seat look at the Danny Gray butcrack solo I have one on my 07 springer.. there are pic under the springer heading search danny gray seats  ....
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #2 on: October 02, 2010, 10:29:25 PM »

what about seats for two people
Logged

Staylock

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
Re: Here's what I wanna do any suggestions???
« Reply #3 on: October 03, 2010, 12:32:43 AM »

Take a look at this post.  I like my c&c seat.

http://www.cvoharley.com/smf/index.php?topic=26135.0
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #4 on: October 03, 2010, 11:01:29 PM »

thanks
Logged

swat1

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 517

    • CVO1: 2007 FXSTSSE
Re: Here's what I wanna do any suggestions???
« Reply #5 on: October 06, 2010, 06:06:24 AM »

I went with the corbin gunfighter. Has a nice deep pocket
Logged
That just happened

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #6 on: October 07, 2010, 08:20:02 PM »

How much of a job to relocate the turn signals to the forks
Logged

shortdog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 390
Re: Here's what I wanna do any suggestions???
« Reply #7 on: October 08, 2010, 08:20:18 AM »

There is a kit for turn signal relocation in the H-D catalogue. I had it done on my pre-CVO Dyna. Look at your tree just about half way up the sprins and see if there are holes drilled and tapped. If so that would be where the signal kits or windshield or both would bolt in. Sorry I don't have the part numbers.
Logged

shortdog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 390
Re: Here's what I wanna do any suggestions???
« Reply #8 on: October 08, 2010, 08:22:57 AM »

Those holes are where the keepers for the brake line and clutch cable are bolted on.
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #9 on: October 16, 2010, 12:01:45 PM »

Here are some pics with the turn signals in different positions tell me what ya like best!!!!
« Last Edit: October 16, 2010, 12:04:01 PM by jrmediatv »
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #10 on: October 16, 2010, 12:06:17 PM »

Here is one of the turn signals up by the lights they sit littlte further back don't stick out to much
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #11 on: October 16, 2010, 12:08:15 PM »

top view of them in the high position
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #12 on: October 16, 2010, 12:15:27 PM »

Another I just can't decide they don't stick out as far in the up position. Also I want to do something with the mirrors in this picture the mirrors are off any suggestions on that
« Last Edit: October 16, 2010, 12:18:10 PM by jrmediatv »
Logged

ice6900

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3268

    • CVO1: fxstsse 07
    • CVO2: (non cvo) fxdl customised
    • CVO3: (custom)arlen ness 1914 flat trak replica
Re: Here's what I wanna do any suggestions???
« Reply #13 on: October 16, 2010, 01:35:15 PM »

As your in trial and error mode, try the mirrors in the new highly inventive MOCO upside position to see what it looks like, but please be careful not to damage your tank
Logged

jrmediatv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 105
Re: Here's what I wanna do any suggestions???
« Reply #14 on: October 16, 2010, 03:23:29 PM »

That is my plan but with different mirrors I like the down look on the mirrors

Logged
Pages: [1] 2  All
 

Page created in 0.131 seconds with 24 queries.