Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[North Star]

Just covered up the SERG for hibernation, and noticed a gap at the joint of the fairing under the windshield (see pics).

Is this normal, or should the rubber moulding under the windshield continue on to cover up this joint?

[North Star]

.

[Gettinold]

Looks like it's sliding down or shrinking. Mine loosened up from the heat this summer. Replaced it.

[North Star]

Looks like it's sliding down or shrinking. Mine loosened up from the heat this summer. Replaced it.

What's shrinking- the moulding? You can see where the moulding ends, then the rest of the seam is uncovered.

[martys]

I'm not 100% sure but I think it might be the way that the Klockworks fit.   

[Bandit4142]

There is no moulding between the fairing halves, behind the windshield area.   That black portion of the windshield should rise in a curve to cover that seamed area...  not sure why the black from the windshield doesn't cover it.

[CVODON]

Nothing wrong, that is the way it is made. Normally the windshield will have a black band in this area that curves, yours doesn't so it shows.

[Highjagger]

This is exactly the same as mine looked in stock .
 I have put in a longer one.

[hdbrad03]

Usually the windshield has foam strip to seal this area. At least Clearview uses foam.


 
     Brad

[North Star]

They should probably have put something there- water must be getting in there when I wash it.

Thanks guys.