Topic: "HOW TO" supply the 6B connector on the SESG2 for XM and NIM and "probably" CB (Read 18546 times)

East Coast · « **Reply #30 on:** November 10, 2011, 07:55:47 PM »

thanks, sounds the start of a new topic.....

Streetglide77 · « **Reply #31 on:** July 22, 2017, 02:24:09 PM »

Hi I was wondering if you could send me the pictures of the wiring harness because they no longer are visible on the post I started building the wiring harness with your diagram I was in the middle of it and then the photos became unavailable because this forum doesn't support third-party Photobucket photos anymore for some reason if you could do that that would be great thanks because I do have the satellite unit now it was in the process of building the harness. Thank you

I know this post is old I hope you see it and are able to reply at a loss right now can't seem to find anything so I can complete my project .

Author Topic: "HOW TO" supply the 6B connector on the SESG2 for XM and NIM and "probably" CB (Read 18546 times)

East Coast

Re: "HOW TO" supply the 6B connector on the SESG2 for XM and NIM and "probably" CB

Streetglide77

Re: "HOW TO" supply the 6B connector on the SESG2 for XM and NIM and "probably" CB