Topic: Removing Hi Output baffles (Read 1432 times)

Furmon · « **on:** January 13, 2011, 12:58:58 PM »

I've been trying to remove the baffles from my Vance and Hines Hi Output mufflers to install quiet baffles. Thus far I have been unsuccessful. I removed both screws from the end caps and tried to use a hook puller to pull the baffles out, isn't working. Any tips or clues that would help me out would be greatly appreciated. Thanks ahead of time. Larry

dlaws01 · « **Reply #1 on:** January 13, 2011, 01:55:13 PM »

A good hacksaw just forward of the baffles should do the trick.

LarryB · « **Reply #2 on:** January 13, 2011, 02:14:24 PM »

Hold the muffler firmly at the big end a slam the small end on a block of wood to get the baffle to slip down and hope that the screw hole is visible. then try and flatten the inside of the screw hole so the baffle will then slide out. done this before when working with welds
good luck

Author Topic: Removing Hi Output baffles (Read 1432 times)

Furmon

Removing Hi Output baffles

dlaws01

Re: Removing Hi Output baffles

LarryB

Re: Removing Hi Output baffles