Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[JR]

Thanks Fatboy! Tony from Zippers said the same thing. He called them up since they have never used Thundermax ECM before. He said he was real easy to work with. He modified the Map and I can't believe the difference it made in the seat of the pants, forget about the dyno sheet! The mechanic that installed and dyno'd is the only one that touches my bike. They know how picky I am and he is the same way. Great Kid and a great job![smiley=xyxthumbs.gif]He caught one of my throttle cables hanging on by a thread and replaced it with one a little longer. Thank God he found that as I like to take 4-600 mile scoots when I get the opportunity.

                                                                    JR [smiley=banana.gif]

[grc]

Thanks Fatboy! Tony from Zippers said the same thing. He called them up since they have never used Thundermax ECM before. He said he was real easy to work with. He modified the Map and I can't believe the difference it made in the seat of the pants, forget about the dyno sheet! The mechanic that installed and dyno'd is the only one that touches my bike. They know how picky I am and he is the same way. Great Kid and a great job![smiley=xyxthumbs.gif]He caught one of my throttle cables hanging on by a thread and replaced it with one a little longer. Thank God he found that as I like to take 4-600 mile scoots when I get the opportunity.

                                                                  

[JR]

JR,

The final curve looks real good, especially compared to a stock 103 at 2500 - 3500 rpm.

[thechop107]

Nice gains JR.  Gotta like that tourqe curve.  Do you have a stock baseline run to compare, before upgrades?  

Brian @ Bumpus did a great job on your tune up.  The map that was supplied with your ThunderMax ECM did require fine tuning for your application to achieve optimal results, as it was generated with a 50MM throttle body.  

I spoke with Brian while your job was in progress - he's a nice guy - savy too. When I returned his call, he was already linked and testing the waters with software that he had never used before.  He was on a mission to provide you the very best results.  Nice to have such pros pulling for you in your local dealership.  [smiley=xyxthumbs.gif]

Enjoy your new power.  If your heading to Myrtle Beach, look us up at Broadway on The Beach.    


See you there!

Bill Lam  
Zipper's Performance Products



            

[JR]

Bill thanks alot! [smiley=xyxthumbs.gif] I'm so thankful to have Brian work on my scooter. I was impressed with him the first time I met him. I am also very thankful for Tony at Zippers for helping setting me up. I must say though, I was told you had a Map for my cams, AC,and Fatcats but they were with performance baffles which I did not choose to go with. It was suppose to be with ECM. If you did not have one for this application, I should have been notified. Tony knew I was waiting on ecm and bike was at dealer so maybe he knew I was to have dyno'd. It was my understanding I would not have needed Dyno if I did not want to. I'm glad I did now. Will not be able to attend Myrtle Beach this time but look forward to some day seeing ya'll. Until then, God Bless!

                                                                                        JR [smiley=banana.gif]

[JR]

Nice gains JR.

[Fired00d]

JR,
Those results are awesome. [smiley=xyxthumbs.gif] Glad you got everything worked out and are now grinning like the rest of us that had been waiting on these cams. Take care, and enjoy twisting that throttle.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[DCFIREMANN]

JR I hope you enjoy your NEW RIDE!!!! The guys at Zippers will bend over backwards to help you. They are very busy and sometimes it takes awhile but they will take care of you. I just can't wait to get Punkin back!!!!!! Maybe with a 124 inch motor to boot!!!!!!

Be Safe

THE DAWG

[HUBBARD]

JR I hope you enjoy your NEW RIDE!!!! The guys at Zippers will bend over backwards to help you. They are very busy and sometimes it takes awhile but they will take care of you. I just can't wait to get Punkin back!!!!!! [highlight]Maybe with a 124 inch motor to boot[/highlight]!!!!!!

Be Safe

THE DAWG

Yeah, 'er 'uh, DAWG,
   Now, at long last, I may have some competition.  Any chance of stretchin' 'em out at Octoberfest, there DAWG?  October ain't that far away, ya' know.  Please advise.  Later--HUBBARD

[Fatboy]

If I was a betting man....I'd bet 'ol Maudie and the Punkin could meet up even sooner for an awesome  display of speed and power.......say WV State Hog Rally ?  [smiley=nixweiss.gif] 8-)

(I'm a part-time promoter ya know)  [smiley=huepfenlol2.gif]

[yellowsedeuce]

Hey JR,

Congrats on the results of the newly added go fast goodies!  

Ride safe!

Yellowesedeuce

[HUBBARD]

If I was a betting man....I'd bet 'ol Maudie and the Punkin could meet up even sooner for an awesome

[JR]

Hey JR,

Congrats on the results of the newly added go fast goodies!

[DCFIREMANN]

If I was a betting man....I'd bet 'ol Maudie and the Punkin could meet up even sooner for an awesome

[Fatboy]

 Boy oh boy......this could get ugly if the "Led Sled" chits the bed and gets smoked on her own home turf.  [smiley=nervous.gif]

 158hp WOW   that should make it very very interesting to say the least........now we all know what the Dawg had up his sleeve.  8-)

 Git-r-done Mike !  [smiley=xyxthumbs.gif] Hubbard needs some company at the top. [smiley=drink.gif]