Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Lever]

had  the fueling 574 cam installed with andrews pushrods .030 head gasket 30 tooth front sprocket
tune with tts  w/o dyno  by my indy shop
had my  bike  pick up and had it detailed before the holidays ,  HD shop was slow  so i asked them to run my bike on dyno 
got the results back   max power was 92.12  max torque 97.54 smoothing 5
 i really haven't been able to ride the bike much due to the weather had this all done before the holidays,  unfortunately due to Xmas  funds i wasn't able to do any headwork
when i ask the service writer about my #'s  hes blaming the dyno set up  ..saying  the low #'s are more realistic  in everyday riding ? with load and wind Resistance etc.

[sadunbar]

had  the fueling 574 cam installed with andrews pushrods .030 head gasket 30 tooth front sprocket
tune with tts  w/o dyno  by my indy shop
had my  bike  pick up and had it detailed before the holidays ,  HD shop was slow  so i asked them to run my bike on dyno 
got the results back   max power was 92.12  max torque 97.54 smoothing 5
 i really haven't been able to ride the bike much due to the weather had this all done before the holidays,  unfortunately due to Xmas  funds i wasn't able to do any headwork
when i ask the service writer about my #'s  hes blaming the dyno set up  ..saying  the low #'s are more realistic  in everyday riding ? with load and wind Resistance etc.

Is your motor stock, other than the cams, pushrods, thinner gasket and TTS?  (Air cleaner, pipes, throttle body?)

[Lever]

i have the v&h  pro pipe  stock ventilator

[sadunbar]

i have the v&h  pro pipe  stock ventilator

I believe if your bike was dyno tuned by someone capable with the TTS, you would see better results.

[JCZ]

I believe if your bike was dyno tuned by someone capable with the TTS, you would see better results.

+1

[Lever]

kk i feel Lil better now cause i really didn't want to pay again having different  cams installed  
 i do know of another place  that is familiar with tts  as soon as the weather breaks or i can find someone  with a enclosed trailer to haul my bike there, and let him tune it. i will, he has a dyno also

[2018_FLTRXSE]

kk i feel Lil better now cause i really didn't want to pay again having different  cams installed  
 i do know of another place  that is familiar with tts  as soon as the weather breaks or i can find someone  with a enclosed trailer to haul my bike there, and let him tune it. i will, he has a dyno also

another vote for TTS and a competent person doing tuning.

I noted you dont post about the rest of your combo?... year, engine, model?

[Lever]

bike is a 2010 cvo convertible   aprox 3,800 miles 

[Texas 103]

I believe if your bike was dyno tuned by someone capable with the TTS, you would see better results.

+3

[10SE5]

Ask Doc if he can reccomend someone in your area.

[fatboi1959]

Finally... REAL dyno numbers! 

[red ben59]

WHERE?

[HILLSIDECYCLE.COM]

kk i feel Lil better now cause i really didn't want to pay again having different  cams installed  
 i do know of another place  that is familiar with tts  as soon as the weather breaks or i can find someone  with a enclosed trailer to haul my bike there, and let him tune it. i will, he has a dyno also

If your hopping up on the drum, once again, then IF, your thinking of more power, establish those changes at this time, and tune it only one more time.
Scott

[Lever]

Will do Scott , hopefully I'm done  with mods for this year
  I  just want  the results  and performance  like everyone else  got with this  cam set up

[springer09]

i feel ur pain leaver just did the stage two of fullsac toys and iam not impressed the 555 woods cams do not impress me one bit looking to get rid of these cams asap no more low end then stock cams what a waste of money !!!!!!!!!!!!!!!!!!!!!!!!!!!!!