I was told to be nice to it for the first couple hunderd miles... being a roller cam I fail to see why but I will oblige...
First opinion:
Deeper, Throatier rumble... I am and have been running fullsac 2.25" power cores with the stock packing. Bike had a tinnier, raspier sound with the stock compression and stock cams. VERY easy to set off car alarms just cruising by... Loud and agressive when you get into the throttle.
30T and -1 belt put the bike perfectly in the powerband... at
60 (my bad) 65 I'm at 2700 RPM and some change.... in 6th. Even in 6th the rollon is amazing... no lugging, no downshifting... 65-90 comes FAST, and not even WOT blasts yet! A few more miles and I'll drop a gear or 2 at freeway speed and see what it does....

I upgraded the oil pump to the fueling race unit as I wanted OP in all conditions.... most of my riding here is under 75 (I say most, not all

) and a LOT in traffic... the though of the OP at ZERO for extended periods at idle does not work for me! At current, cruise at freeway speed is 32-40psi... nice... idle hot the lowest I saw was just below 16, just as the ETIMS kicked in. It was hot and humid yesterday and I got stuck in traffic...
TTS was brainless for the remap... just took me a while to refamiliarize with it... make the speedo correction and away you go!.. reminder: dont forget to turn the switch to "run", if the ignition is on and the switch off, the ecm will not accept reprogram... (duh)