Topic: How to raise my handlebar just 1 inch? (Read 3148 times)

altugo · « **on:** April 19, 2006, 02:04:19 PM »

I know we discussed this before but i couldnt get an answer and my problem persist.To remind you guys i need to raise my handlebar just about an inch or even less to install a headlight nacelle.I know txfatboy

tunedse2 · « **Reply #1 on:** April 19, 2006, 09:27:33 PM »

Altug, I dont think you can raise them an inch without replacing the risers, and I havnt found a set yet that will fit with our tach setup. I have however seen at least 3 of our bikes with nacelle's. Get the phone number from TX to his dealer and see if they will talk you through the process. Also let me know if you need that MAP.. I'll send it when your ready...

altugo · « **Reply #2 on:** April 20, 2006, 02:27:20 AM »

My thunderheaders just arrived but they are still at the customs.I hope to clear them next week.All i need now is SERT and will be ordering it today so should get it next week too.I will need to get the map soon.If you could provide it i would apreciate.Thanks so much for helping me out.
Altug
[smiley=drink.gif] [smiley=drink.gif] [smiley=drink.gif] [smiley=drink.gif] [smiley=drink.gif]

altugo · « **Reply #3 on:** April 25, 2006, 01:06:38 PM »

I solved the handlebar raising problem and installed the nacelle.Didnt have to buy risers or change any wires and cables.Will post the pics tomorrow. [smiley=drink.gif]

altugo · « **Reply #4 on:** May 01, 2006, 04:58:40 AM »

well here are few pics with the nacelle installed.I have custom made two disks with 2 cm high with a 13 mm diameter hole in the middle and had to buy longer screws to put them under handlebar.Didnt have to change any cables.Now the tach doesnt touch the nacelle theres about 1 cm in between.I dont have close ups but will take a few detail shots later.

altugo · « **Reply #5 on:** May 01, 2006, 05:01:07 AM »

heres a frontal.Afellow biker on a test ride.

altugo · « **Reply #6 on:** May 01, 2006, 05:04:24 AM »

I guess he liked the ride.You can see the distance between tach and the nacelle.

altugo · « **Reply #7 on:** May 01, 2006, 05:06:43 AM »

And the good news is it works under the rain too lol me gettin wet on the way home from a ride.
[smiley=drink.gif]

AUSSIE_FLSTFSE · « **Reply #8 on:** May 01, 2006, 06:29:14 AM »

That headlight nacelle looks really good! What is the part # on that one.

Cheers
Aussie

altugo · « **Reply #9 on:** May 01, 2006, 07:20:02 AM »

Hi aussie part number is 67907-96A

altugo · « **Reply #10 on:** May 01, 2006, 11:17:35 AM »

How to resize these pics?

Mrs Red Hot · « **Reply #11 on:** May 02, 2006, 10:57:57 AM »

Quote

How to resize these pics?

Try using Irfanview it's a free program that I use. Real easy and works great. www.irfanview.com size your pics to about 580 x 420, this size works great for all forums.

Sandy

altugo · « **Reply #12 on:** May 03, 2006, 08:37:03 AM »

Thanks Sandy [smiley=xyxthumbs.gif]

Mrs Red Hot · « **Reply #13 on:** May 04, 2006, 07:58:48 AM »

Quote

Thanks Sandy [smiley=xyxthumbs.gif]

Your very welcome. [smiley=xyxthumbs.gif] Sandy

NE-Tacoma06Fatboy · « **Reply #14 on:** July 15, 2006, 12:17:56 AM »

does adding the nacelle raise the bar height? And by how much?

Author Topic: How to raise my handlebar just 1 inch? (Read 3148 times)

altugo

How to raise my handlebar just 1 inch?

tunedse2

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

AUSSIE_FLSTFSE

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

Mrs Red Hot

Re: How to raise my handlebar just 1 inch?

altugo

Re: How to raise my handlebar just 1 inch?

Mrs Red Hot

Re: How to raise my handlebar just 1 inch?

NE-Tacoma06Fatboy

Re: How to raise my handlebar just 1 inch?