Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Steering head.....grease zerk  (Read 2453 times)

0 Members and 1 Guest are viewing this topic.

lucille

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 114
Steering head.....grease zerk
« on: March 29, 2011, 10:32:36 PM »

Will be drilling/tapping for a grease fitting on my '91........
Would someone with a CVO measure their steering head......how far from the top is the zerk, and still on the left side?
Much appreciated....thanks
Logged
'92 FXRS Lowrider.....
'91 FXRT.....113 S&S...6 speed

JonnyD

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • 2014 CVO Deluxe
Re: Steering head.....grease zerk
« Reply #1 on: March 30, 2011, 10:03:30 PM »

1" to the center of the fitting from the top of the neck
Logged

lucille

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 114
Re: Steering head.....grease zerk
« Reply #2 on: March 30, 2011, 10:56:29 PM »

Thank you Jon......appreciate it!
Logged
'92 FXRS Lowrider.....
'91 FXRT.....113 S&S...6 speed

JonnyD

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 59
  • 2014 CVO Deluxe
Re: Steering head.....grease zerk
« Reply #3 on: March 30, 2011, 11:07:56 PM »

FYI, mines on the right side (sitting on the bike)
Logged

mp

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Steering head.....grease zerk
« Reply #4 on: April 09, 2011, 01:35:44 PM »

On my '92 FXRS, there was a plug in the RIGHT side of the neck, located an inch and a half down from the center of the triple clamp set screw to the center of the plug.  I just replaced the plug with a zerk.
« Last Edit: April 09, 2011, 01:42:40 PM by mp »
Logged

lucille

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 114
Re: Steering head.....grease zerk
« Reply #5 on: April 09, 2011, 04:09:03 PM »

On my '92 FXRS, there was a plug in the RIGHT side of the neck, located an inch and a half down from the center of the triple clamp set screw to the center of the plug.  I just replaced the plug with a zerk....
Interesting.......the '92s were advertised as having the zerk.......
My '92 FXRS Lowrider (DOM 10/'91) came without one......
Factory template for drilling for the zerk.....left side, 1" below the top. Later updated by the factory....
Thank you for the replies and info.......much appreciated...
Logged
'92 FXRS Lowrider.....
'91 FXRT.....113 S&S...6 speed

mp

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: Steering head.....grease zerk
« Reply #6 on: April 09, 2011, 06:25:10 PM »

My '92 was manufactured in June of '92....
Now you've got me looking.  My service manual says the zerk is on the left side.  So I looked, and the headlight wires cross the left side of the steering head, kind of fouling where the zerk would be, so.... a mid/late year change?
Logged

lucille

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 114
Re: Steering head.....grease zerk
« Reply #7 on: April 09, 2011, 07:21:57 PM »

mp.....they can be a quirky motorcycle........thanks for the info!......Greg
Logged
'92 FXRS Lowrider.....
'91 FXRT.....113 S&S...6 speed
 

Page created in 0.238 seconds with 24 queries.