Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2012 Model Year Mastertune Update Released  (Read 1220 times)

0 Members and 1 Guest are viewing this topic.

Steve Cole

  • Manufacturer TTS
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1430
2012 Model Year Mastertune Update Released
« on: July 12, 2011, 02:47:46 PM »

We have released a new set of updates that includes tuning for 2012 Touring models only. The other models will follow as we get them finished up but since we had a few other upgrades already in the software we decided to release those along with the 2012 Touring product at this time. One thing we added to Vtune was a new feature for those of you adjusting the EGR. On the screen that shows the modified VE values you can now go to the "Settings" Menu and select "Highlight Low Map". This will change the display so you can see the area the EGR will affect. These values are shown in bold font. I hope this helps some of you figuring out what areas see the most affect from the EGR adjustments. This feature can be turned off or on while viewing the screen.
Logged
The Best you know, is the Best you've had........ not necessarily the Best.

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Online Online
  • Posts: 5477
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: 2012 Model Year Mastertune Update Released
« Reply #1 on: July 16, 2011, 05:11:17 PM »

If I have an .MT7 version map can I still load it, V-Tune it, save the corrected map as a .MT7 version and then upload it with the newly upgraded TTS software?
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

Steve Cole

  • Manufacturer TTS
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1430
Re: 2012 Model Year Mastertune Update Released
« Reply #2 on: July 17, 2011, 02:13:59 PM »

Yes, the newer software works with both MT7 and MT8 base calibrations. As always we recommend you make a backup of what's already in the bike so you can always go back to that if need be for any reason.
Logged
The Best you know, is the Best you've had........ not necessarily the Best.
 

Page created in 0.236 seconds with 24 queries.