The NEXT mod is the
S/C/S-4 2-into-1 exhaust from
Drago's Bike Works... the
"Dragula with a twist" for baggers. It's straight, not stepped, equal-length headers with a slightly different 2.5" inch collector than the Dragula, and the Dragula 4.05" muffler with a 2.55" baffle good to 130 HP. And their left-side ghost pipe to keep the looks proper for this bike.
I spoke with Frank there at some length this week... he's a really a great guy! He got the S/C/S-4 out the door today, and hopefully, I'll have it here on Saturday. He strongly recommended that I go ahead and install the Cometic MLS .030" head gaskets I've had sitting around here for awhile, to get the squish better and bump the compression a bit to approaching 9.8-1, which the 54H cams will like. He's confident that I will get better low-end torque than I've been getting.
SOOO... the current pipes, throttle body, and heads come off tomorrow to install the Cometic gaskets, then install the S/C/S-4 when it gets here. The headers and CVO cans are already sold, too!
Then of course more TTS tuning runs to dial it in. The fun need ENDS 'round here!
