Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[110tHunDer]

Eqcons is right . . . . the PCIII will build off of whatever "base" map has been installed.  If Eqcons map was built from a completely stock map, you should remove your current tuning before hooking up the PCIII and using his map.

[Robmay]

No, I don't believe you are right sadunbar!    The SERVICE isn't the issue; Karen is great, and is a real asset to them. The QUALITY is poor in numerous respects; some of us are more tolerant of that than others, but each and every set has had the same problems peculiar to which version they are. There is no way on this planet [highlight]that for $800 even [/highlight]one person should have the problems. That great service that you (and I, and others) have discovered would not be known to so many of us if the quality matched the price in the first place.

Jim

I keep hearing about $800 being very expensive. Does this include the mufflers? If so I would say they are in line if not that is a bit high.

[Robmay]

I've been struggling with this for some time now and I believe that is what I'll probably do.  I like the V&H mounting system as opposed to the Rineharts (whom I don't trust anymore).  Now to find a SERT MAP for this combo on a 110...

Scott,

Check out the Basani's.

[Eqcons]

I keep hearing about $800 being very expensive. Does this include the mufflers? If so I would say they are in line if not that is a bit high.

Yes, it includes the mufflers.

[110tHunDer]

I keep hearing about $800 being very expensive. Does this include the mufflers? If so I would say they are in line if not that is a bit high.

I got mine from www.directparts.com for $675 delivered.

[Robmay]

I got mine from www.directparts.com for $675 delivered.

How did yours fit?

[spydglide]

How did yours fit?

Hey RobMay.......you didn't really ask him that, now did you?  [smiley=nervous.gif]    har!  spyder

[110tHunDer]

How did yours fit?

Don't know yet. [smiley=nixweiss.gif]  The bike's in the shop now.  You're not saying cheap ones don't fit good, are you? [smiley=nervous.gif]

[spydglide]

Don't know yet. [smiley=nixweiss.gif]  The bike's in the shop now.  You're not saying cheap ones don't fit good, are you? [smiley=nervous.gif]

He must not know (past posts) the probs you've had with getting those pipes right from the git-go.  [smiley=nervous.gif] har!  spyder

[110tHunDer]

He must not know (past posts) the probs you've had with getting those pipes right from the git-go.  [smiley=nervous.gif] har!  spyder

Still have not received the replacement left-side pipe from Karen.  The good news about that is you guys in Maggie Valley will get to see WTF I'm talking about with this discoloration.  The bad news is that my bike will look like CHIT for Maggie Valley.

[spydglide]

Still have not received the replacement left-side pipe from Karen.  The good news about that is [highlight]you guys in Maggie Valley will get to see WTF I'm talking about with this discoloration.[/highlight]  The bad news is that my bike will look like CHIT for Maggie Valley.

well, you know that some of us (D00d, Spiderman, & other C.O.B.B's) will not be able to get down low enough to see these blemishes......and still be able to get back up.  [smiley=nervous.gif] har!  [smiley=huepfenlol2.gif] spyder

[sqrrl24]

Installed rineharts on 04  [smiley=pumpkin.gif] . I am by no means a super wrench but I would not wish that job on anybody. After 2 hours of tweak here tweak there and one call to Unbalanced. I finished it this morning. All my parts looked great. I had same problem as Eqcons did with p clamp and heat sheild but after I gently forced it on it does'nt look bad but it is touching the p clamp. There is very little clearance in several areas and heat sheilds fit tight mostly around clamps.  I have not rode it yet cause it is now raining. I hope I don't get blueing on heat sheilds but I think there is strong possibility I will. I am running a thundermax ecm and I downloaded there map, so I don't think the tune will be the cause if they do blue. I will post back the outcome.

[Robmay]

Don't know yet. [smiley=nixweiss.gif]  The bike's in the shop now.  You're not saying cheap ones don't fit good, are you? [smiley=nervous.gif]

I'm sorry 103.... I got lost in the madness!!! [smiley=huepfenlol2.gif] I did not even look at your avitar for some reason when I posted that!! I just wanted to know if they were all troublesome because the Reinharts were my second choice behind the Basani's. I have had such good dealings with Rick at Brakesoft though that I am surely gonna give the Bassani's first shot. IF (IF) I get my SE in time he already has a set ordered for me to put on at Biketoberfest. He said I should go with the 3" muffs he has to let that 110 breath. Just not sure I will like the sound or not. I like the sound of the muffs on my 05 ultra but will they let it breath properly? I really don't think they would restrict the flow anymore than the stock pipes.

[110tHunDer]

I am running a thundermax ecm and I downloaded there map . . .

sqrrl, curious what Zipper's mods you did and if they had a map that matched them.  I'd have probably gone that route, but at the time, they only had maps for the larger TB which I decided against. [smiley=nixweiss.gif]

[sqrrl24]

sqrrl, curious what Zipper's mods you did and if they had a map that matched them.  I'd have probably gone that route, but at the time, they only had maps for the larger TB which I decided against. [smiley=nixweiss.gif]

103,
    My mods are zippers wide A/C, Thundermax ECM & Rineharts std baffles. With the newest software smartlink IV they have more maps. the map I used was a match to my setup. I just got back from taking a short ride and I am pleased with sound & performance so far. (I am comparing it to my 05  [smiley=banana.gif] with SE A/C Race Tuner & White Bro E series 2-1 Dyno tuned at 96hp 100 ft TQ.) the Rineharts are not to loud till you really get on it then its loud. I like it. and it is louder than E series. I am going to have it on a dyno soon to see what I actualy have.(Monday or tuesday hopefully) I will post it when I get it.