www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Rivera Primo Pro Clutch 1056-0022  (Read 2677 times)

0 Members and 1 Guest are viewing this topic.

guppytrash

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1537
Rivera Primo Pro Clutch 1056-0022
« on: September 12, 2011, 08:43:46 PM »
Looking for some advice.
I have my outer primary cover off and I have this Rivera Primo Pro Clutch that I was going to put on.
Looks like the bolt for the SE compensator comes out and then the whole clutch needs to come out so I can press out the original hub and then press in a new bearing and the Primo hub.
What is the simple way to get the clutch loose.  Do the 5 bolts release the clutch or is that just going to let the clutch plates loose?
Any cautions of what to do or NOT do when removing the hydraulic clutch?
And last does anybody have a substitute for the tool to stick between the comp sprockets and clutch sprockets to loosen and torque the bolts on the comp and clutch?
Logged

guppytrash

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1537
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #1 on: September 12, 2011, 11:39:15 PM »
never mind I got it figured out.
Logged

VANAMAL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1862

    • CVO1: 2012 SESG
    • CVO2: 2005 seeg banana
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #2 on: September 13, 2011, 09:54:02 AM »
i think there was a problem with the rod length on the hyd clutches. needed to be ground down.
Logged

Trapperdog

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2965

    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2009 ST1300 Police
    • CVO3: 2006 ST1300
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #3 on: September 13, 2011, 11:32:57 AM »
Quote from: VANAMAL on September 13, 2011, 09:54:02 AM
i think there was a problem with the rod length on the hyd clutches. needed to be ground down.
There is. Jim at Metal Dragon has the cut legnth specs if Rivera hasn't started printing them in thier instructions yet.
Logged

guppytrash

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1537
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #4 on: September 13, 2011, 01:19:49 PM »
How much does it get shortened?
I assume off the tappered end?
Logged

hogasm

  • Guest
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #5 on: September 13, 2011, 05:26:17 PM »
Quote from: guppytrash on September 13, 2011, 01:19:49 PM
How much does it get shortened?
I assume off the tappered end?


I'll look for the thread I did on here a few years ago.

http://www.cvoharley.com/smf/index.php?topic=12797.0
« Last Edit: September 13, 2011, 05:43:21 PM by hogasm »
Logged

guppytrash

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1537
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #6 on: September 13, 2011, 10:32:35 PM »
Thanks for all the help!
Thanks to Jim at Metal Dragon too!
The Harley tech that did my install said he called around and ended up not shortening the rod at all.
I rode it home and it works beautiful...should I be looking for something bad because he did not shorten it?
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #7 on: September 13, 2011, 10:51:26 PM »
Quote from: guppytrash on September 13, 2011, 10:32:35 PM
Thanks for all the help!
Thanks to Jim at Metal Dragon too!
The Harley tech that did my install said he called around and ended up not shortening the rod at all.
I rode it home and it works beautiful...should I be looking for something bad because he did not shorten it?


 :confused5:  :nixweiss: Not sure how he made it work without.......
Logged

smiley1049

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 401
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #8 on: September 13, 2011, 11:40:43 PM »
Worked great in my bike and I never had to shorten the rod on my 2007.
Chuck
Logged

hogasm

  • Guest
Re: Rivera Primo Pro Clutch 1056-0022
« Reply #9 on: September 14, 2011, 06:41:14 AM »
Quote from: hd-dude on September 13, 2011, 10:51:26 PM
:confused5:  :nixweiss: Not sure how he made it work without.......


Must have left something out :nixweiss:
Logged
 

Page created in 0.217 seconds with 20 queries.