www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: WHY 6200 RPM on REV LIMITER? or WHY NOT?  (Read 1047 times)

0 Members and 1 Guest are viewing this topic.

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
WHY 6200 RPM on REV LIMITER? or WHY NOT?
« on: September 26, 2011, 10:39:00 AM »
  In 2010 I had my 09 SERG origanally tuned at dealer, Only mods are 09 OEM open header pipe, SEST PRO pt# 32109-08B OEM MUFF body's w/ Cycle Shack baffles, stock cams. The Dealer had Rev Limiter set @ 6200 rpm,  This June I swapped the OEM muffs for V&H slip ons and developed a stumble of idle & decel pop @2000-2100 rpm,
 I recently had the bike retuned at a tuner that just tunes bikes, he provides no other aftermarket services. While he was doing the base line runs he recommended readjusting the rev limiter to 5750. his explanation for this the way I think I understood it, "AND I AM BY NO MEANS A ROCKET SCIENTEST" was that the TQ starts dropping around 4000 rpm and not making much efficient power beyond that rpm!  Decel pop is gone no more stumble off idle, also idles much smother while sitting at red lights!  TUNEING EXPERTS OPPINIONS PLEASE   
Logged

prs2xs

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: WHY 6200 RPM on REV LIMITER? or WHY NOT?
« Reply #1 on: September 26, 2011, 11:15:27 AM »
Absolutely no reason to run your engine to 6200. By the look of your dyno sheet, it's all over by 5000 rpm. Only thing you accomplish by running it higher than 5500 is to beat the crap out of your valve train.
If you had some mods done, it would be a different story!
JMHO!
Logged

Keats

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2642
  • Do not be led astray

    • CVO1: 2008 FLHTCUSE3
    • CVO2: 2003 FXSTDSEI
Re: WHY 6200 RPM on REV LIMITER? or WHY NOT?
« Reply #2 on: September 26, 2011, 11:20:24 AM »
Why Not Lower?   power dropping like a rock at 5600 5700 anyway, 6000 rpm not useful anyway.

Most want to extend the RPM range, but they have a cam that keeps making power at that point.

lowering redline could save some engine wear.....
Logged
Formally FLHTCUSE3
SoA #99.9            "Never say Die"
SEST,   open A/C , dyno tuned, D&D Fatcats 2 into 1 ceramic coated, new SE CNC Ported and coated Heads with 2.120 intake valve, SE camplate,
Jims SE Crank "Darkhorsed", Timkin conversion, Andrews 54H cams, Arnott Air shocks, intimidator front valves, HID headlights, LED turn signals, Moto Lights,  Zumo 550, SE compensator.

dartman

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 940
Re: WHY 6200 RPM on REV LIMITER? or WHY NOT?
« Reply #3 on: September 26, 2011, 12:15:50 PM »
Quote from: Keats on September 26, 2011, 11:20:24 AM
Why Not Lower?   power dropping like a rock at 5600 5700 anyway, 6000 rpm not useful anyway.

Most want to extend the RPM range, but they have a cam that keeps making power at that point.

lowering redline could save some engine wear.....
Agreed, having those big  pistons flopping around at 6,000 rpms, way past your power curve does nothing but wear it out faster.
Logged

BostonboyDH

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 522

    • CVO1: FLTRSE3
Re: WHY 6200 RPM on REV LIMITER? or WHY NOT?
« Reply #4 on: September 26, 2011, 02:38:25 PM »
Thanks for the replies! Thats pretty much the way Rob the tuner had explained the reason for lowering the rev limiter, It was ultimately my decision, and it made sense to me, I just wanted to make sure I understood . Planning for Cams &  Stepped Header Pipe in 2012     "Bostonboy"
Logged
 

Page created in 0.077 seconds with 21 queries.