Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[speedydog5]

just wondering my mech at HD is recommending se 260 cams  to put in bike it has all other bolt ons now like pipe Intake other then that motor is stock just wondering past expiernces prior to cams bike was at 94 hp 112 Tq

[HD Street Performance]

With your pipe and stock compression I expect you to be very unhappy. It will loose all of the low end torque you now have. It will not start to come on until 3,000rpm. There are a lot of better choices even if you are tied to HD cams.

[speedydog5]

With your pipe and stock compression I expect you to be very unhappy. It will loose all of the low end torque you now have. It will not start to come on until 3,000rpm. There are a lot of better choices even if you are tied to HD cams.

What would be a good screaming eagle cam to go with then any suggestions ??

[HD Street Performance]

SE259e

[clubbie]

^^^^^ what he said.

[HILLSIDECYCLE.COM]

just wondering my mech at HD is recommending se 260 cams  to put in bike it has all other bolt ons now like pipe Intake other then that motor is stock just wondering past expiernces prior to cams bike was at 94 hp 112 Tq

Wrong cam selection, UNLESS, more compression is introduced.
Scott

[firefighter156]

just wondering my mech at HD is recommending se 260 cams  to put in bike it has all other bolt ons now like pipe Intake other then that motor is stock just wondering past expiernces prior to cams bike was at 94 hp 112 Tq

What do you have for a tuner?  What pipe do you have on?  Not sure what you hope to gain? You may like a CR 575??