Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mjb765]

That sucks that's one of the main reasons I wanted the Corbin over the other brands. I guess when I'm ready I'll have to find a used p-pad and locking mount. bummer    There website still shows it as locking guess they haven't updated yet. post some pics when you get it please.

Sure thing....but just FYI....it's probably at least a month away yet.

[xsdbs]

I had to remove the fender trim strips to install my Corbin solo tour seat.
I assumed there was some "variance" from seat to seat where the rubber bumpers are mounted.
Not a big deal, can't see them under the seat anyway...

 

[icio67]

can anybody give me the Parts Number of the fender trim strip? Rubber and Chrome parts...

TNX

[mjb765]

can anybody give me the Parts Number of the fender trim strip? Rubber and Chrome parts...

TNX

11100024--you need to order 2 of them.

rubber and chrome all 1 piece.

[icio67]

TNX 

[redbeard719]

11100024--you need to order 2 of them.

rubber and chrome all 1 piece.

Are you sure?

I priced these strips out from my dealer, and have different part numbers from their parts books.

51761-10 - Trim, Pillion Mount, Chrm
51760-10 - Trim, Pillion Mount, Rubber

Total for all the pieces going through Lake Shore HD was about $100, if I recall.

[mjb765]

Are you sure?

I priced these strips out from my dealer, and have different part numbers from their parts books.

51761-10 - Trim, Pillion Mount, Chrm
51760-10 - Trim, Pillion Mount, Rubber

Total for all the pieces going through Lake Shore HD was about $100, if I recall.

 Got them out of the 2012 CVO street glide parts book......and something else just hit me....those part numbers end in "-10" which would mean they came out in 2010...these trim peices didn't come out until 2012 so they have the new style part numbers.

[redbeard719]

Got them out of the 2012 CVO street glide parts book......and something else just hit me....those part numbers end in "-10" which would mean they came out in 2010...these trim peices didn't come out until 2012 so they have the new style part numbers.

I am thinking they may have been stock on the CVO Softail Convertible. I was thinking the same thing on the PN ending in 10.  But the CVO SG and CVO RGC only started this year with the 2 piece seat...

Either way, I like the price of your part better, if it's the right one..

[redbeard719]

Got them out of the 2012 CVO street glide parts book......and something else just hit me....those part numbers end in "-10" which would mean they came out in 2010...these trim peices didn't come out until 2012 so they have the new style part numbers.

Confirmed, your part numbers are correct.  And only ~$30 a piece, much more palatable....

Please disregard the part numbers I posted earlier....

[BUBBLEHEAD]

MJB765,  Did you get your seat?

[fly]

Are you sure?

I priced these strips out from my dealer, and have different part numbers from their parts books.

51761-10 - Trim, Pillion Mount, Chrm
51760-10 - Trim, Pillion Mount, Rubber

Total for all the pieces going through Lake Shore HD was about $100, if I recall.

Do you need to order 2 of each part number? Was thinking this might be nice to have on the 2011 with a solo seat.

[mjb765]

MJB765,  Did you get your seat?

I got the seat and positioned the trim strips so that the seat bumpers in the rear rest on top of them a little to keep them off of the fender. The front of the pass seat can't rest on the trim strips since you are not able to get the seat to sit far enough down when the front bumpers hit the strips--if that makes any sense at all......

[mjb765]

Do you need to order 2 of each part number? Was thinking this might be nice to have on the 2011 with a solo seat.

I used these on my '11 SESG.....part number 11100024--you need to order 2 of them.

[BUBBLEHEAD]

I got the seat and positioned the trim strips so that the seat bumpers in the rear rest on top of them a little to keep them off of the fender. The front of the pass seat can't rest on the trim strips since you are not able to get the seat to sit far enough down when the front bumpers hit the strips--if that makes any sense at all

So did your p-pad have the locking hardware or use the screw system? got pics?

[Pod]

I just got the '12' SESG and want to put the Corbin Solo on w/ the optional passenger pillon.  I do not want to remove the chrome strips and reading all of your threads I get mixed ideas if it works or not.  Has anyone physically put the passenger pillon over the strips w/out any issues?  As others noted the Harley pillon says you have to remove the chrome strips which sucks, I mean we just spent $33K on a bike and they should have a seat to works.  I called Corbin and told them about the threads on here and they too would like to know if their pillon works so please help the brother out.