Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: Which ways better to achieve compression  (Read 2559 times)

0 Members and 1 Guest are viewing this topic.

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Which ways better to achieve compression
« on: February 18, 2012, 04:03:27 PM »

What will work better using the stock head and changing the piston or milling the head and leaving the stock piston?Basically which way makes makes more power using the tw777 woods cam milling and porting the heads or using the stock heads and changing to a high comp. piston?
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

HUBBARD

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4082
  • FLHTCUSE7
    • WV

Re: Which ways better to achieve compression
« Reply #1 on: February 18, 2012, 08:00:24 PM »

What's the budget?  :nixweiss: Later--HUBBARD
Logged
2012 FLHTCUSE7  (Electric Orange/Black)  Built Motor (124), D&D "Borzilla" Exhaust, Tilley/K&N Air Induction,
"National President"-"Hillbilly Rocket Riders", MC, Mother Chapter, WV
"National President"-"W.H.O.R.E", TPT, WV Chapter

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Which ways better to achieve compression
« Reply #2 on: February 18, 2012, 09:21:31 PM »

 Around $3000
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Which ways better to achieve compression
« Reply #3 on: February 18, 2012, 10:41:48 PM »

The answer would depend on the cam choice.
Logged

MadCVORG

  • '11 FLTRUSE
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 317
Re: Which ways better to achieve compression
« Reply #4 on: February 19, 2012, 01:17:58 AM »

My bike is being modified now, with 10.5 pistons.  I figured it's easier to replace a piston than it is to 'un-mill' a head.
Logged

barefoot3zk5

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 620
  • I used to be a KRYPTO.. Now I'm 1 OF 1

    • CVO1: 2011 FLHXSEII Dragula 2/1 exh.. Performance Mach airbox..Metalsports 26" front wheel w/6piston singleside brake 13" rotor and matched 18" rear 200 tire..TTS tuner by DOC .. Woods cams and Hi comp pistons.. 600 LEDs hidden PLUS, SONY head unit and gauges all green LEDs to match,500watt ARC amp w/4 Focal6.5 spkrs,Install by Peter @SOUNDZ .. Yafee tag frame . chrome inner/outer primary. greeen gator seat/backrest ..major engine mods 125+ HP and powder coated heads/cyl and diamond cut. homemade rear air suspension
Re: Which ways better to achieve compression
« Reply #5 on: February 19, 2012, 12:11:32 PM »

The answer would depend on the cam choice.
Dewey.. Perhaps you will elaborate ??
Logged

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Which ways better to achieve compression
« Reply #6 on: February 19, 2012, 12:26:04 PM »

The cam will most likely be a woods TW-777.
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Which ways better to achieve compression
« Reply #7 on: February 19, 2012, 01:10:39 PM »

Whoever ports the heads will know what to do. The 110 is not the same animal as a bath tub chamber and needs a little different treatment IME.
Logged

barefoot3zk5

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 620
  • I used to be a KRYPTO.. Now I'm 1 OF 1

    • CVO1: 2011 FLHXSEII Dragula 2/1 exh.. Performance Mach airbox..Metalsports 26" front wheel w/6piston singleside brake 13" rotor and matched 18" rear 200 tire..TTS tuner by DOC .. Woods cams and Hi comp pistons.. 600 LEDs hidden PLUS, SONY head unit and gauges all green LEDs to match,500watt ARC amp w/4 Focal6.5 spkrs,Install by Peter @SOUNDZ .. Yafee tag frame . chrome inner/outer primary. greeen gator seat/backrest ..major engine mods 125+ HP and powder coated heads/cyl and diamond cut. homemade rear air suspension
Re: Which ways better to achieve compression
« Reply #8 on: February 19, 2012, 01:42:14 PM »

Geez Dewey .. could ya over simplfy a lil bit  ???  :nixweiss:
Logged

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Which ways better to achieve compression
« Reply #9 on: February 19, 2012, 02:42:16 PM »

What does that mean port heads or change piston ,do not want to do both which way can give me most power safely
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Which ways better to achieve compression
« Reply #10 on: February 19, 2012, 06:12:18 PM »

If I was targeting 10.5/1 I would use pistons
Logged

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Which ways better to achieve compression
« Reply #11 on: February 19, 2012, 08:37:25 PM »

So if i change the piston and leave the head stock i will make more power than if i do head work and leave the piston stock?
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

Smitty2u

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 135

    • CVO1: 2011 FLTRUSE
Re: Which ways better to achieve compression
« Reply #12 on: February 19, 2012, 09:10:48 PM »

Compression and porting heads are two of many pieces of the puzzle in a performance upgrade.  I found a good read, which helped me to understand how the pieces influenced torque and horsepower.  I was able to read it online without even having to buy the book.  The book is named "How To Build A Harley-Davidson Torque Monster".  
Here's the actual link...
http://www.amazon.com/Harley-Davidson-Torque-Monster-Motorbooks-Workshop/dp/0760329117/ref=cm_cr_pr_product_top
Click on the picture of the book and it will open in it's entirety.

Good Luck!

Smitty
« Last Edit: February 19, 2012, 09:15:08 PM by Smitty2u »
Logged
130TQ 124HP
TR Stage 2 Street Eliminator Pro-Touring Heads
TR-660-SM Cam
TTS Master Tuner
SE 10.5:1 forged pistons
4-5/8" stroke Se Pro Stroker Flywheel and rod Assembly, trued and welded by Revolution Performance
Cylinders 4.060 Bore
Timekin Bearing
SE 58mm TB
SE 5.3 grms/sec injectors
SE lifters,
SE rods
SE Clutch upgrade
V&H Power Dual headers with V&H Twin Slash Oval slipons.
Andrews 31T transmission sprocket
K&N air filter

cvo1717

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 673
    • NY


    • CVO1: 2013 CVO BREAKOUT BLACK SOLD
    • CVO2: 2010 CVO FATBOB BLACK DENIM HELLFIRE FLAMES TRADED IN
    • CVO3: 2020 CVO street glide
Re: Which ways better to achieve compression
« Reply #13 on: February 19, 2012, 09:22:46 PM »

thanks will read
Logged
Mike
2013 CVO BREAKOUT 117 KIT
ROSAS HEADS WOODS TW 8-6 CAM
RB RACING 2 INTO 1 PROSTOCK CHALLENGE PIPE
130 HP  134 TQ STD
126 hp   131 TQ SAE

ob1

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182

    • CVO1: FLSTCUSE 2
    • CVO2: FLSTSE 1
    • CVO3: 2013 Custom FLHX
Re: Which ways better to achieve compression
« Reply #14 on: February 19, 2012, 09:52:08 PM »

Pretty Good read, Thanks.
Logged
Pages: [1] 2  All
 

Page created in 0.24 seconds with 25 queries.