Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Tomtune1]

Will do. Thanks.

[Tomtune1]

Sitting in front of the bike, digging in again.. One thing I noticed, the instructions state, "for all installations, mate the six-way connectors (6A) and (6B) of the nim/iPod harness to connectors (6B) on the vehicle interconnect harness (this one I cannot locate) and (6A) on the vehicle audio harness ( it would be safe to say this one is coming out of the radio and it is connected.

Where is the plug on the vehicle interconnect harness. Do I need to do this on the Road Glide?

[timo482]

many new hd's do NOT have a 6b- ruins your day im sure

there ARE ways to make a custom harness that supply a 6b

but its all custom - nothing you can buy will fix it

to

[Tomtune1]

Ok, I'm listening. Really need to get this fixed, Laconia is coming and the bike is on the lift.

[bissjim]

Without connecting to the 6a connector your NIM and IPod will not work. This connector is where the CAN + and CAN - wires get connected. without the CAN wires the radio will not see the NIM or the IPOD. I would say that if you did not splice the CAN wires from the NIM and IPOD into the radio's CAN wires then this is your problem. You can just find these wires and splice the wires from the NIM and IPOD onto them or make a 6a connector.

This thread will help you.

http://www.cvoharley.com/smf/index.php?topic=66425.0

Jim

[Tomtune1]

Jim, really appreciate your input... so a picture is worth a thousand words.. you can see i have all the connections hooked up, the one 6-pin in my hand is not connected, shoule it be?

Tom

[Tomtune1]

Can anyone tell me if the picture posted looks wrong. I checked the nim (A version) and the road Tech HD Garmin is correct.. I believe the wiring in the picture is wrong or missing something...

[Harleypingman]

Do you have the HD 2009 Touring Model Service Manual and FLTRSE3 supplement?

Carl

[SteveFLHTK]

Looking at that pic.....and going from memory from when the NIM and IPOD module first came out....the 2nd 6 pin adapter is only used if you have both NIM and IPOD adapter..

[Tomtune1]

Yes I have both the iPod and nim installed, the radio is not seeing both

[Tomtune1]

Yes I have both the manual and the supplement.

[SDCVO]

You get it handled?

[Tomtune1]

No sir. I just got back into town, was just outside in the garage looking at it. Almost ready to throw in the towel.

[Tomtune1]

I believe it is the harness shown in the picture, I must have it wrong.

[SDCVO]

If you check with the guys at San Diego Harley 619-890-3345 (great group!) I am sure they will help you out. see this thread...
http://www.cvoharley.com/smf/index.php?topic=74903.0