Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dead_Reckoning]

Does anyone have the P/N for the 2004 FLHTCSE2 License Plate "Mounting Plate"?

I just mounted the match Full TP on my 2003 FLHRSEI2.
It just about sits on top of the license plate.

I have been told that the 2004 FLHTCSE2 License Plate "Mounting Plate" has a bit of and angle from the 90, un like the 03 SERK has.

Also interested in a picture as well.

Many Thanks
DR

[grc]

Follow this link to see the parts listing for the entire license plate mounting bracket.  It's not just a different back plate.

http://partsfinder.onlinemicrofiche.com/ronnies//showmodel.asp?Type=13&make=hdmc&A=463&B=44&vehicleid=2004-Harley-Davidson-Street-Bike-FLHTCSE-CVO-ELECTRA-GLIDE®-(PJ)-FENDER---REAR-W/-SUPPORTS


Jerry

[Dead_Reckoning]

Follow this link to see the parts listing for the entire license plate mounting bracket.  It's not just a different back plate.

http://partsfinder.onlinemicrofiche.com/ronnies//showmodel.asp?Type=13&make=hdmc&A=463&B=44&vehicleid=2004-Harley-Davidson-Street-Bike-FLHTCSE-CVO-ELECTRA-GLIDE®-(PJ)-FENDER---REAR-W/-SUPPORTS


Jerry

Thanks
That pretty much looks like what my 03 SERK has, minus the antenna mount.

DR

[Twolanerider]

Kuryakyn makes a piece that improves the look a bit:

http://www.kuryakyn.com/Products/487/Curved-Laydown-License-Plate-Mount


Or you could just ditch the high mounted plated and move it down:

http://www.kuryakyn.com/Products/405/Curved-License-Plate-Mount

[Dead_Reckoning]

Kuryakyn makes a piece that improves the look a bit:

http://www.kuryakyn.com/Products/487/Curved-Laydown-License-Plate-Mount


Or you could just ditch the high mounted plated and move it down:

http://www.kuryakyn.com/Products/405/Curved-License-Plate-Mount

  That was my first thought Don. When I change the rear tire and the wheel is off, move the mount down.
BB talked me out oof it.

I did some searchiong and I think this will work for me.
Looks similar to what Joe did.

Framed Layback License Plate Mounting Kit
Wrap your license plate in chrome. This mirror-finish license mount tips the plate back for a sleek appearance, and conceals the mounting hardware for a custom look. The front frame covers the license holes, and the mirror-smooth back plate hides the unfinished rear of the plate. Kit accepts plates measuring to 7-1/4" by 4-1/4" (184 x 108mm). Kit includes installation hardware and rear fender reflector.

P/N 60210-07
Fits '99-'08 Road King®, Road Glide® and Electra Glide® Standard models with 7-1/4" x 4-1/4" license plate.

[Fired00d]

That was my first thought Don. When I change the rear tire and the wheel is off, move the mount down.
BB talked me out oof it.

I did some searchiong and I think this will work for me.
Looks similar to what Joe did.

Framed Layback License Plate Mounting Kit
Wrap your license plate in chrome. This mirror-finish license mount tips the plate back for a sleek appearance, and conceals the mounting hardware for a custom look. The front frame covers the license holes, and the mirror-smooth back plate hides the unfinished rear of the plate. Kit accepts plates measuring to 7-1/4" by 4-1/4" (184 x 108mm). Kit includes installation hardware and rear fender reflector.

P/N 60210-07
Fits '99-'08 Road King®, Road Glide® and Electra Glide® Standard models with 7-1/4" x 4-1/4" license plate.

DR,
Not at a place where I can look at my spreadsheet but I did get the H-D Laydown license plate kit when I purchased my bike.

Here are some old pictures that are on the site that you can partially see the license plate...

 
Ride Safe,
Fired00d
 

[grc]

Take a look at the setup for the 2005 SEEG and see if that wouldn't suit you better.  The plate mounts below the tail light, not above it.

http://partsfinder.onlinemicrofiche.com/ronnies//showmodel.asp?Type=13&make=hdmc&A=517&B=55&vehicleid=2005-Harley-Davidson-Street-Bike-FLHTCSE2-Screamin'-Eagle®-Electra-Glide®-2-(PK)-TURN-SIGNALS---REAR


Jerry

[Dead_Reckoning]

DR,
Not at a place where I can look at my spreadsheet but I did get the H-D Laydown license plate kit when I purchased my bike.

 
Ride Safe,
Fired00d
 

That did the trick
P/N 60277-07 Layback License Plate
 :)Now I have room to spare under the TP, even with the HD License Plate Frame on.

Thanks All
DR

[Fired00d]

That did the trick
P/N 60277-07 Layback License Plate
 :)Now I have room to spare under the TP, even with the HD License Plate Frame on.

Thanks All
DR

That P/N looks like what I have on mine...

Back then the P/N was 53385-00 which isn't showing up in the system anymore.

 
Ride Safe,
Fired00d
 

[Fired00d]

DR,
Just for chits and giggles I checked on eBay to see if there was any of these w/the P/N I had and found the following...

Layback License Plate Mount - Touring 53385-00 (DISCONTINUED)

LAYBACK LICENSE PLATE MOUNT

The first one is a decent deal since cost new in '04 was $51.95.

 
Ride Safe,
Fired00d
 

[Cvostu]

The lay down plate holder look so much better than the stock one.   If anyone needs the stock one.  I have one worth the antenna mount.