www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Fullsac Install  (Read 2633 times)

0 Members and 1 Guest are viewing this topic.

pvtryno

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 84

    • CVO1: FLHTCUSE7 Wicked Sapphire
Fullsac Install
« on: May 31, 2012, 12:46:48 AM »
Looking for some recommendations here. I determined that I wanted to go with the Fullsac Stage 1 and 2 on my CUSE7 based off of the comments from this site and contacted a dealer in Denver to conduct the install and was told they wouldn't support.

"Due to a warranty issue we are not willing to install the parts form Fullsac. H-D does not allow us to core mufflers even if there is a new baffle being installed. It is our service department's policy that we do not install aftermarket tuning systems, because of the warranty of motorcycle could be voided."

Has anyone else had similar issues, and for those with the Fullsac, what route did you guys take to get them on your bike?

Ryan
Logged
08 Crossbones - Gloss Black
12 FLHTCUSE - Wicked Sapphire

Cvostu

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5149

    • CVO1: 2024 Legendary Orange road glide custom
    • CVO2: 2019 Mako Shark Fade road glide custom
Re: Fullsac Install
« Reply #1 on: May 31, 2012, 07:02:54 AM »
I had my system from fulsac installed anyway.  And tts.    And cams.   It's my bike.  8)
Logged

muddypaws

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5280
  • 2012 FLHTCUS7

    • CVO1: 2005 CVO
    • CVO2: 2009 CVO SEUC
    • CVO3: 2017 CVO LIMITED
    • Re/Max
Re: Fullsac Install
« Reply #2 on: May 31, 2012, 07:08:21 AM »
I purchased the Fullsac stuff through my dealer. Find another dealer.
Logged
Bill

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: Fullsac Install
« Reply #3 on: May 31, 2012, 07:31:52 AM »
Yeah, Find a another dealer!!!  :2vrolijk_21:
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2422
  • 65 FLH 93" + others
Re: Fullsac Install
« Reply #4 on: May 31, 2012, 09:03:26 AM »
Quote from: pvtryno on May 31, 2012, 12:46:48 AM
Looking for some recommendations here. I determined that I wanted to go with the Fullsac Stage 1 and 2 on my CUSE7 based off of the comments from this site and contacted a dealer in Denver to conduct the install and was told they wouldn't support.

"Due to a warranty issue we are not willing to install the parts form Fullsac. H-D does not allow us to core mufflers even if there is a new baffle being installed. It is our service department's policy that we do not install aftermarket tuning systems, because of the warranty of motorcycle could be voided."

Has anyone else had similar issues, and for those with the Fullsac, what route did you guys take to get them on your bike?

Ryan

Our local dealer is going that way........sign of the times again!
Indy.
 :nixweiss:
Logged
HOGMIKE

mark

  • Guest
Re: Fullsac Install
« Reply #5 on: May 31, 2012, 09:52:06 AM »
I bet if you were buying Screamin" Eagle aftermarket parts that you were purchasing thru this particular dealer, they'd gladly install and support.
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Fullsac Install
« Reply #6 on: May 31, 2012, 05:19:04 PM »
Quote from: Mark on May 31, 2012, 09:52:06 AM
I bet if you were buying Screamin" Eagle aftermarket parts that you were purchasing thru this particular dealer, they'd gladly install and support.

X2...Ask them if they would install an exhaust system that they normally sell, and would that be covered under warranty, and if so, what the difference is.  I can somewhat understand about the TTS because they want to sell you the SEPRT, even though the SERT used to be built by the same folks, and the newer version (TTS) is virtually the same thing with added features not available on the SEPRT.

This kind of stuff is a dealer by dealer type thing...find another dealer.

Or better yet, put the Stage I on yourself, hook up a laptop with the TTS and upload one of Steve's canned maps.  Save a few hundred dollars for about 4-6 hours of your own time.
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

phato1

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3644


    • CVO1: 2011.5 FLHTCUSE6 - SOLD
    • CVO2: 2001 FLSTFI - non CVO, but really cool
Re: Fullsac Install
« Reply #7 on: May 31, 2012, 08:00:58 PM »
I didn't even involve the dealer. Purchased everything directly from Fullsac and did the install in my garage. It took me about an hour to remove/replace the baffles, took about another hour to remove the stock exhaust and install the new system - then about ten minutes to save the stock map and load the new one from Steve using the TTS.

I have had my dealer install aftermarket stuff like S&S gear drive, and full V&H exhaust systems on my other bikes during the HD warranty period without issue - I don't have any extended warranty to worry about getting voided.

I would inquire at other dealers about warranty support, especially if you do have an extended warranty.
Logged
"The solutions are all simple....after you have arrived at them."     - Robert M. Pirsig

crackers

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 150

    • CVO1: 2012 FLHTCUSE7
Re: Fullsac Install
« Reply #8 on: May 31, 2012, 09:27:50 PM »
I asked my dealer about the warranty if I went with the stage II fullsac kit and he said no problem with the warranty. I was told today that a couple that had moved here from Co a few weeks ago found out they carried Fullsac and asked how they could sell what they couldn't warranty....they were really surprised to find out that not all dealerships are created the same.

Had bike on the dyno today, first opening they had since I installed the stage II. Great combo and very pleased
 
Find the right dealer
Logged


Fullsac "D" pipe
4" Rineharts
Heads by Jack Larson
Diamond cut
TTS Tuner
Progressive 944's and Progressive Monotubes

LovemyCVOgirl

  • Four wheels move the body.... Two wheels move the soul.
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3571
  • Give me a switchback any day!

    • CVO1: 2012 FLHXSE Ruby Red/Typhoon Maroon
    • CVO2: 2015 Toyota Tundra 4X4 SR5 TRD 5.7L V8
Re: Fullsac Install
« Reply #9 on: May 31, 2012, 09:35:37 PM »
Interesting thread.... My dealer has just hooked up with Fullsac so they can offer customers a discount, so I believe that they are also installing them, so I believe this to be a dealer by dealer issue.  :nixweiss:
Logged
Some days you're a bug, some days you're a windshield.

pvtryno

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 84

    • CVO1: FLHTCUSE7 Wicked Sapphire
Re: Fullsac Install
« Reply #10 on: June 01, 2012, 12:44:00 AM »
Great responses, I really appreciate the feedback. Does anyone know of any dealers in the CO area that are willing to do an install? I'm still stuck over here in Afghanistan and wanted the Fullsac installed by the time I got home so I can take off and ride instead of busting my knuckles trying to do an install.
Again, thanks for the responses,

Ryan
Logged
08 Crossbones - Gloss Black
12 FLHTCUSE - Wicked Sapphire
 

Page created in 0.218 seconds with 20 queries.