Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[smkymtnboy]

Someone (friend) asked me what it would cost to do a stock 110 complete rebuild. anyone know? if anyone knows what a reliable streetable performance rebuild would cost I would like to know. may save my pennies for that. did i just say pennies,i meant benjamins

[grc]

Someone (friend) asked me what it would cost to do a stock 110 complete rebuild. anyone know? if anyone knows what a reliable streetable performance rebuild would cost I would like to know. may save my pennies for that. did i just say pennies,i meant benjamins

You can ship it off to Harley for a complete remanufacturing process for about $4200-$4500 (not including remove and install labor).  Follow this link for information on the program:

http://www.harley-davidson.com/en_US/Content/Pages/Engines/remanufacturing.html

Of course, if it were me I think I'd rather find a really good independent engine builder to do the deed using better quality parts than stock in critical areas.  But that can get pretty pricey, so it comes down to what a person's priorities are.


Jerry

[HD Street Performance]

I could give you some leads not too far from you if you PM me.

[HILLSIDECYCLE.COM]

If not too far from Bowling Green H-D, contact them.
Good folks, and they have an outstanding tuner employed there, as well.
Scott

[prodrag1320]

whats the problem with the motor?

[smkymtnboy]

whats the problem with the motor?

no problem! just curious to the costs and what may be a good performance build.

[prodrag1320]

well it depends what you want done,complete with welded/pinned crank,heads done,cams,lifters,ect would be around $2000.00-2500.00 here

[petewerner]

well it depends what you want done,complete with welded/pinned crank,heads done,cams,lifters,ect would be around $2000.00-2500.00 here

That is parts and labor? What parts are U talking about, ie. cams, lifters & push rods, barrels or bored, head work (completed or?)
Thanks!! 

[Mrs Rooster]

well it depends what you want done,complete with welded/pinned crank,heads done,cams,lifters,ect would be around $2000.00-2500.00 here

 Wowzer!! all of that for 2000.00-2500.00 are they lined up at the door yet?

[Zinister]

Damn good price. I was quoted a higher price just for headwork!!!!!

[Lever]

i have between $5,500-$6,500 in my build ...looks like i paid  to much 

[smkymtnboy]

well it depends what you want done,complete with welded/pinned crank,heads done,cams,lifters,ect would be around $2000.00-2500.00 here

i would want everything you mentioned in a depenable performance build. is that possible? i want to ride not race.thanks for responding and quoting some numbers. most will not you did. in my book thats a plus. thanks again!

[cvobiker]

Wowzer!! all of that for 2000.00-2500.00 are they lined up at the door yet?

I dont know,, sounds like in the door, the hook is baited with a meal worm, only to find latter a gold spinner is really needed.. when it sounds to9 good,, i always get  

[prodrag1320]

like i said,it depends what is to be done,we get 995.00 + parts for a normal rebuild.depending on what kind of "performance" build is wanted,we`ve done alot of them (95",103",98" & 107") in the 2000.00-2500.00 range,lots of shops out there trying to retire on everyone that walks in the door,im already semi-retired,we just did a S&S 124" build for 5200.00 out the door.

[cvobiker]

like i said,it depends what is to be done,we get 995.00 + parts for a normal rebuild.depending on what kind of "performance" build is wanted,we`ve done alot of them (95",103",98" & 107") in the 2000.00-2500.00 range,lots of shops out there trying to retire on everyone that walks in the door,im already semi-retired,we just did a S&S 124" build for 5200.00 out the door.

Dam,,,, wish I knew you were around before I threw my POS Jim's  131 overboard....  If you are true to your word,,, I think you'll have somthen good going.