Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roadrunner]

Hello all, would anyone know if you can order the connector part attached to the interconnect that secures the connector to the fairing? 

I have attached a photo.

Thanks and ride safe!

[AXIL]

  Yes. There in the hd parts book.   axil

[Twolanerider]

Think the you're after is carried by HD as part number 72199-94.

[roadrunner]

Think the you're after is carried by HD as part number 72199-94.

Thanks!

Connector anchor.

Happy Dads day all!

[roadrunner]

Looking to clean up the wiring in the fairing while I add the Hawg Wired speakers/cross-overs and have a question.

I the manual most of the connectors are listed where they mount however, I have one connector laying on the top of the front forks, a 4 connector with 3 red wires seems to be [33] to Ign switch.  I did not see where this connector attaches to or does it just lay on top of the forks inside the fairing?

I had a off frame done back in 2005 and most of the connector anchors are missing. Any photos would be great!

Thanks and ride safe and stay cool!

Found it, another missing clip.
Route the Ignition switch connector [33], 4-place Packard, to front of inner fairing. Mate pin and socket halves of connector and install onto anchor at bottom of radio. See Figure 8-64.