Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Fattbaggernknox]

I've done a search w/o any results & was wondering if anyone has compiled a parts list required to install the 11 sesg rear fender filler with led's on a 11 serg? Any help would be greatly appreciated.

[pj57]

Harley offers the complete set up for converting.  MSRP $999.99.  I converted mine before this kit came out.  I can attest the kit is cheaper that doing it piece meal...find a 20% off dealer and you'll be at $800.00.  Of course you have to get the fender, fascia and struts painted.  Here's the link:

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448778671&FOLDER%3C%3Efolder_id=2534374309041116&ASSORTMENT%3C%3East_id=2534374309041116&locale=en_US&locale=en_US&bmUID=1348010336158&bmLocale=en_US

By the way, the contour of the turn signal fascia is designed to go with the extended bags.  Not sure how it will look if you don't get the bag lowers (or the extensions like the '09 SE Roadglides).

[Fattbaggernknox]

Why could'nt you install the filler assy on your existing  fender?

[grc]

Why could'nt you install the filler assy on your existing  fender?

I assume you probably could if you did some drilling and swapped out some other parts, but then you would still have the regular taillight.  The fenders designed to work with the filler/LED lights do not have the hole for the taillight like your current fender does.


Jerry

[MAT]

I've done a search w/o any results & was wondering if anyone has compiled a parts list required to install the 11 sesg rear fender filler with led's on a 11 serg? Any help would be greatly appreciated.

60465-09 fascia 156.99
59818-09 stud plate x 2 15.12
60919-09 stiffener plate x 2 29.48
7499 nuts x 6 6.60
11891 spacers x 3 4.95
69383-09 LH light 129.15
69407-09 RH light 129.15
3152 screws x 6
70338-09 wire harness 38.49

This is the list I used for my 09' Ultra, I used my original fender, had the hole for the tail light filled by welding in metal then body and paint, I also replaced bags with stretched bags.

Also, I ordered these parts from Zanotti HD when they were in business.

Mike

[Fattbaggernknox]

60465-09 fascia 156.99
59818-09 stud plate x 2 15.12
60919-09 stiffener plate x 2 29.48
7499 nuts x 6 6.60
11891 spacers x 3 4.95
69383-09 LH light 129.15
69407-09 RH light 129.15
3152 screws x 6
70338-09 wire harness 38.49

This is the list I used for my 09' Ultra, I used my original fender, had the hole for the tail light filled by welding in metal then body and paint, I also replaced bags with stretched bags.

Also, I ordered these parts from Zanotti HD when they were in business.

Mike

Thanks!!! I'm the manager of a body shop so welding & filling/painting isnt that big of a issue..

[MAT]

Thanks!!! I'm the manager of a body shop so welding & filling/painting isn't that big of a issue..

That part was easy and it made more sense than to buy another fender, I also filled in the indentation where the fixed bolt is for the lower fender brace that is covered with the CVO emblem, the new license plate holder needed to be in that area and it was right on the bottom edge of it.


Mike

[FAST380]

 

[PMG1]

Interesting topic. Having owned an 09 Road Glide I became fond of the filler, extended bags and LED light panals. Now that I have a new Ultra could someone post pictures. I was reviewing a parts list with my dealership Friday and this topic came up. Thanks for your time in posting pics.

[bluegoose]

2010 CVO Ultra with tour pack off.

[FAST380]

Very nice!!

[bluegoose]

One from the side

[PMG1]

Looks very nice has anyone else done one like this?

[bluegoose]

Thanks
I believe there are a few that have done this conversion.  I actually got the idea and parts list from a member on this site three years ago when I joined.

[wolverine]

Here's a pix of somebody who did that. Looks really good. I think Bluegooses looks better.