Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jr1000yarder]

I there a better speaker set up for my RG??  The factory ones a good but more is always better!

How hard are they to swap out?

Thanks

[dayne66]

Lookin' for the same ...but for my '12 SG.  Every place I have talked to gets a woody because they think I want to spend thousands on amps and speakers.  Someone must make some upgrade speakers...or at least will soon.

[dartman]

I there a better speaker set up for my RG??  The factory ones a good but more is always better!

How hard are they to swap out?

Thanks

Check here , http://www.eglidegoodies.com/id72.html

[dayne66]

Check here , http://www.eglidegoodies.com/id72.html

Don't think any of those are for a CVO.....CVOs front speakers are 1ohm.

[dartman]

You are correct, I had an 09, apparently 12 and 13s are different, it appears that HD makes an adapter kit that will allow for an upgrade.
Important Note: 2012-2013 CVO RoadGlides come from Harley with smaller 5X7” stock speakers installed. Therefore to install the custom J&M ROKKER XT series 7.25” speakers into the fairing, you will need to obtain from Harley, the replacement speaker/grill adapters, Harley part# 77021-98B (right side) & 77022-98B (left side), along with J&M speaker spade wire adapter kit, J&M part# HSWA-2301, for a clean no-modification install.