Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[fueldude00]

The heated grips stopped working on my 2008 Ultra CVO.  I checked the main fuse on the left side of the bike; fuse was good (even replaced it to make sure).  I downloaded the wiring diagram that was posted (thanks!), and it appears there's a second 5A fuse somewhere on the bike.  Problem is, I can't figure out the location of the second fuse.  Anyone have any recommendations?  Sorry if I posted twice...trying to learn this web site:)

[CowboyBagger]

I've got a brand new set of Heat Demons that I bought for my FLHXSE3 that I thought would work with my Wild 1 575 bars, but won't.  I'd sell them for $100.00 if you are interested.

Thanks,

Ryan

[dayne66]

Why wont they work with the 575s? I thought they had the ID issue resolved.

[porthole]

I have Heat Demons in my Wild 1 575's, work great.

[Rooster]

 Heat Demons in my 575's for several years now no problems.

[CowboyBagger]

According to the Wild One Chubby tech people, the right handle bar grip of the 575's needs to be honed out by the thickness of a dime to enable the Heat Demon's to fit.  Before I ordered them, I read on here several people that have used them successfully without reeming out the bar.  So, I thought I would try them anyway.

On the 575 bars that I received, there is "NO WAY" the Heat Demons will fit unless the bars are altered.  The throttle by wire is actually snug by itself.  I looked at the thickness of the bar and imagined making it thinner and then I thought of the possibliity of hitting a pot hole and having the right grip still in my hand but not attached to the bar!  So, I decided not to alter the bar.  Therefore, brand new Heat Demons for sale!