www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: baseline stock and modified dyno run now completed  (Read 2887 times)

0 Members and 1 Guest are viewing this topic.

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
baseline stock and modified dyno run now completed
« on: November 17, 2012, 06:52:56 PM »
Ok got my baseline dyno run done today by Ed at "The Dyno Difference"

completely stock 2013 RGC CVO with the exception of Rush slip-ons

attached is the std dyno run and the SAE run in the next post

STD best HP 87.8     best TQ 110.00

SAE best HP 85.5    best TQ 107.1
 
« Last Edit: November 29, 2012, 11:12:34 PM by sloride »
Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
Re: baseline stock dyno run completed
« Reply #1 on: November 17, 2012, 06:54:12 PM »
sae run

no smoothing
Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)

scttgr8

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 279
  • my new GLIDE

    • CVO1: 2012 FLTRXSE
Re: baseline stock dyno run completed
« Reply #2 on: November 20, 2012, 07:34:59 AM »
base dyno run not too bad
Logged
2012 HD Road Glide Custom CVO (FLTRXSE) Candy Cobalt/Twilight Blue with Real Smoke Graphics I added wrapped chrome license plate bracket/cover, saddlebag guard rails, replaced black Engine covers w/Chrome, RCx slip-ons mounted on Fullsac "C" X head pipe, TTS tuner tuned! Enjoying life ...living the dream!!!

ultrarider123

  • Guest
Re: baseline stock dyno run completed
« Reply #3 on: November 20, 2012, 07:52:31 AM »
Looks pretty good for just about stock.  What does Ed say to expect with those additions you plan and listed on the other thread you started on this subject?  I'm sure you can't wait to see the "after" dyno and thanks for posting. 
Logged

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
Re: baseline stock dyno run completed
« Reply #4 on: November 20, 2012, 09:09:58 AM »
Quote from: Ultrarider1 on November 20, 2012, 07:52:31 AM
Looks pretty good for just about stock.  What does Ed say to expect with those additions you plan and listed on the other thread you started on this subject?  I'm sure you can't wait to see the "after" dyno and thanks for posting. 

Ed said to look for SAE HP in the 94 to 96 range and TQ in the 115 to 117 range.

he also said that more importantly was the motors ability to make high TQ #'s from the 1800 to 5000 RPM range. Thats the "give ya a S**T eating grin" range.
Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)

SG Racer

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1636

    • CVO1: 2011 SESG2, Black Diamond/ Inferno Orange
    • CVO2: 2005 SEEG, Cherry
Re: baseline stock dyno run completed
« Reply #5 on: November 20, 2012, 11:03:17 PM »
Ed will hook you up. He is a great tuner.  I know you will be grinning when he gets it done, I sure was. My bike runs great, except it likes to go 80-90 real easy. LOL. Good luck.
 I am sure he will calibrate your speedo while he is in there, if he does not ask you, get him to do it. Mine was about 3% off.
Logged
D&D Fat Cat W/Ghost pipe
Custom leather seat
12" Yaffe Monkey Bagger Bars
SEPST
93Hp, 116Tq

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
Re: baseline stock dyno run completed
« Reply #6 on: November 29, 2012, 06:54:05 PM »
Ok, the #'s are in. Ed will email me the dyno sheets tonight and i will post them

Stock #'s

STD best HP 87.8     best TQ 110.00

SAE best HP 85.5    best TQ 107.1

With Jackpot 2-1-2 2" Rush cores and a dyno tune by ED at The Dyno Difference.

STD best HP 94.1   best TQ 121.4

SAE best HP 92.9   best TQ 119.8

all these #'s are based on 4th gear pulls. 5th gear made a little higher #'s, but I did not do a baseline in 5th gear to compare it to

The most impressive thing of all is the TQ being over 100#'s from 1800 RPM thru 4800 RPM

The throttle response is incredible and you better have a good grip when you crack this baby open in the lower gears.
Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
Re: baseline stock and modified dyno run now completed
« Reply #7 on: November 30, 2012, 12:57:31 PM »
SAE dyno chart

Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)

sloride

  • Vendor
  • Full CVO Member
  • *
  • Offline Offline
  • Posts: 181
Re: baseline stock and modified dyno run now completed
« Reply #8 on: November 30, 2012, 12:58:22 PM »
STD dyno chart

Logged
2013 RGC CVO (Bevo)
2013 RGC (Da Reaper)
 

Page created in 0.112 seconds with 21 queries.