Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jr1000yarder]

jr1000

That looks great. Looking to do the same to mine when I get it. What Kit did you use to do this and were there any other parts that you needed?

All HD stuff.

[CVORoadKing2013]

Jr1000

I figured that was curious as to the part numbers you used for the HD parts

[FLSTFI Dave]

I removed my signals from the bars when installing 17" apes and went with a headlight with LED signals.

Very nice looking, love the way the wheel looks up front. 

The turn signals are in the head light?  I would like to see a close up of that, who makes it?

[tincup64]

Here is what tincup64 did with his:



~P~

nice looking bike 

[MichaelHDMD]

Kuryakan 5005's... self install, piece of cake.

[metfancowboy]

Well I still haven't decided. It's either what tincup and jr did the HD custom auxiliary bracket kit,or a take off standard light setup from a Road King. I'm kind of leaning towards the HD custom kit,and maybe even the LED headlight and passing lamps. The pictures everyone provided are a great help,so thank you everyone. Please keep them coming if you have any suggestions.

[Racerdj]

I see a couple of options from HD,the kit to put them on the forks and the custom auxiliary light kit. Just wanting some ideas on which way to go. I don't know if I want the passing lamps and signals or just the kit to move them off the bar like the RK Customs. Ideas and pics are welcome.

My new RK is being delivered next week. I will post pics on what HD hardware I used to relocate the turn signals. I also added passing lamps.

[rayson56]

I see a couple of options from HD,the kit to put them on the forks and the custom auxiliary light kit. Just wanting some ideas on which way to go. I don't know if I want the passing lamps and signals or just the kit to move them off the bar like the RK Customs. Ideas and pics are welcome.

I have the stock chrome turn signal setup from my 11 SESG if you are interested. I replaced mine with black ones. You can PM me if you're interested.

[Simpleman1025]

This is an FYI for anyone looking to do add ons with HD accessories. I found this out the hard way. I went to the dealership and was informed that if I buy and have the dealership install within 90 days of your purchase it is covered under your 24 month warranty. So we looked up my 2013 CVO Road King and I was about at 96 days. I've purchased
4 Harley's from them and don't recall being told that but oh well. So a word to the wise, if you want your add ons covered you got 90 days from the date of purchase. I guess I'll pay more attention on my next one...lol.

With that I purchased an auxiliary light bar from a 2013 Standard RK from eBay. Anyone out there have a wiring diagram/instructions for the install?

[RetSUBLDO]

With that I purchased an auxiliary light bar from a 2013 Standard RK from eBay. Anyone out there have a wiring diagram/instructions for the install?

Should be plug and go to the stock connectors inside the nacelle as long as the ebay unit wasn't cut off. You just need to remove the stock signals from the handlebars.

[Simpleman1025]

That's what I was thinking, a Road King is a Road King. They just dressed it up a bit more. I would assume same wiring harness, same frame...etc. I guess I'll pull the light and have a look see

[metfancowboy]

Here is what tincup64 did with his:



~P~

I decided to go this way. It was the HD custom auxiliary kit. Only difference is I went with the HD LED headlight and passing lamps. I think I made the right choice,it really looks great. I want to thank everyone for all the help and ideas.

[Hx2]

That's what I was thinking, a Road King is a Road King. They just dressed it up a bit more. I would assume same wiring harness, same frame...etc. I guess I'll pull the light and have a look see

If the set you bought has the white connectors still on the single wire then all you have to do is plug them into the like connector in the nacelle.  If the set you bought doesn't have the white connectors then both sides of the connector are in the nacelle and all you need is the terminal end.

[Simpleman1025]

If the set you bought has the white connectors still on the single wire then all you have to do is plug them into the like connector in the nacelle.  If the set you bought doesn't have the white connectors then both sides of the connector are in the nacelle and all you need is the terminal end.

Update, there is one 2 wire connector(white) with a cap (auxiliary light switch) and six wire connector (black) turn signals, basically unplug the handlebar turn indicators and plug in the auxiliary signals. The trick would be pulling the wires from the handlebar mounted turn signals. I was thinking to leave them and when I go in for a service let the dealership pull them. Anyone out there have any easy suggestions?

[Simpleman1025]

I think I'll keep the turn signals on the handlebars too, I kinda like it. Here's " Old Red"! Now that's my Road King!!