Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[footpeg12]

Hello all i am trying to find a nice chrome license plate bracket that will work on my 2013 CVO Road King. Any suggestions and/or pictures are welcome.

Thanks, Footpeg

[braymond52]

There's a thread or two on this subject in the CVO Road Glide Custom section.  The rear fender and lights are the same so same things will work for you.

[1sharprdkg]

Welcome to the site from Tennessee! Not sure about the new 13'CVO RK plate bracket. Are you wanting to lay it back at an angle, or completely reposition it down lower on the fender like the CVO Street Glide? What did you have in mind? Since they are new this model year choices may be limited.
Edit: good info from braymond52 post.

[footpeg12]

well like you say my choices are probably limited. laying it back would be great but anything chrome would be a big improvement over the factory black plastic one.  ive not found aything yet. ill check out the other thread.

Thanks

[15CVOSG]

www.cvoharley.com/smf/index.php?topic=81247.0

[footpeg12]

Thanks for the link, i think the Yaffe stealth III looks real nice and it gets rid of that ugly light box too!

[FLSTFI Dave]

I am using the Paul Yaffee Stealth III in Chrome on my 13 CVO King, and in Gloss black on my 12 CVO Skunk.  Its a pretty easy install.  Plugs into the factory wires, uses factory fender holes.  You do have to ream out the nuts on the back of the bracket in the fender, easy to do.  However take the new bolts that come with the Yaffee frame to the hard ware store and get a pair 5mm longer, makes it so much easier to install.

The pictrue is of my 13 King.  Has a new tag number now though

[mitch.smith]

I did the kuryakyn on my SESG3  CURVED LICENSE PLATE
http://www.kuryakyn.com/Products/4145/Curved-License-Plate May not work on yours since I have the long tail lights!!

[longlast]

look at what were stuck with in the UK regulations plate the cost of a  custom plate well lets just
say you'd have a good down payment for ride 2. you tell me how dose one do any thing with this

[BigTrouble]

I also have the Paul Yaffee Stealth.  I think it looks great and I like the sleek look instead of the old light and plate that look like an afterthought.  It is pretty easy to install but if you ever need to put a new plate you have to take everything back apart.  I haven't had it long enough to put the annual tag on but it looks like that could be a bit of a pain. 

[FLSTFI Dave]

I also have the Paul Yaffee Stealth.  I think it looks great and I like the sleek look instead of the old light and plate that look like an afterthought.  It is pretty easy to install but if you ever need to put a new plate you have to take everything back apart.  I haven't had it long enough to put the annual tag on but it looks like that could be a bit of a pain. 

I have that as posted here on my 13 CVO King, but also have it in Black on my 12 Skunk.  I was able to get the new year sticker on and under the frame with out taking it apart.  That sure made me happy.

[tincup64]

anyone from mass have the stealth III?  if so, how does our inspection and registration sticker look on them?  any fear of being pulled over.

thx - tin