Topic: Simple To Do Sound Upgrade (Read 985 times)

loop4re7 · « **on:** February 18, 2013, 03:01:35 PM »

The sound system on my 2012 RG just didn't cut the mustard. So with the help of TIF2's wire harness I installed an Rockford Fosgate PBR 300x2 Amp and Polk MM651 speakers. This combination I removed from my 2011 RG custom prior to selling. Reused the stock speaker grills from the CVO. Removing the grills from speakers was the hardest part of the install. Easiest part the wire harness from TIF2. Left the stock amp in just unplugged and plugged in new harness. Used Hard Ride Audio speakers adapters and made the amp mount bracket out of an old aluminum loose gravel sign. What a big difference this makes. Plenty of bass and no low volume on Ipod songs. There is a fellow om roadglide.org that sells amp mounts if you can't find an old sign. Thanks again to TIF2 for making the install so. EZ

loop4re7 · « **Reply #1 on:** February 18, 2013, 03:04:10 PM »

TIF2 harness Plugged in.

loop4re7 · « **Reply #2 on:** February 18, 2013, 03:06:20 PM »

TIF2 Plug

TIF2 · « **Reply #3 on:** February 18, 2013, 06:49:19 PM »

Nice job on the install!
Glad you're happy with the results.

Thanks for posting this up for the RG owners that may want to do the same.
Rock on ...

Cvostu · « **Reply #4 on:** February 18, 2013, 07:00:19 PM »

Rich. You did it again. Another greatly satisfied customer. But what else is new?

Author Topic: Simple To Do Sound Upgrade (Read 985 times)

loop4re7

Simple To Do Sound Upgrade

loop4re7

Re: Simple To Do Sound Upgrade

loop4re7

Re: Simple To Do Sound Upgrade

TIF2

Re: Simple To Do Sound Upgrade

Cvostu

Re: Simple To Do Sound Upgrade