www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2  All

Author Topic: How many labor hours for a Cam/Head Gasket install?  (Read 6152 times)

0 Members and 1 Guest are viewing this topic.

CowboyBagger

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1143
  • Standing on the Corner!
    • AZ


    • CVO1: FLHXSE3 Ruby Red/Typhoon Maroon
    • CVO2: FLTRKSEANV Heritage paint
How many labor hours for a Cam/Head Gasket install?
« on: March 01, 2013, 12:21:08 PM »
How many hours of labor does it take to install a bolt in cam and a Cometic Head Gasket?  I'm sure the MOCO has a flat rate book for this common practice.  I'm sure a lot of you guys have done several and can probably get it done quicker than flat rate.

Cowboy
« Last Edit: March 01, 2013, 12:22:45 PM by CowboyBagger »
Logged
From an ocean tide, to an 8 second ride! Life is a ride, so make it a good one.

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #1 on: March 01, 2013, 02:47:24 PM »
You can look up what book time is here :)
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

ob1

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 182

    • CVO1: FLSTCUSE 2
    • CVO2: FLSTSE 1
    • CVO3: 2013 Custom FLHX
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #2 on: March 01, 2013, 06:20:29 PM »
Thanks Harry. the link answers some of my unrelated questions.

tim
Logged

Lever

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1482
  • keep the rubber side down
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #3 on: March 01, 2013, 07:42:09 PM »
wow !!!  thats some really good info there thanks
Logged
2010 CVO Convertible  crimson red sunglo/Autumn Haze with Metal Grind Graphics
2014 113  motor 10.8 compression
SAE smoothing #5  125.7 hp / 122.9 tq
2017 Road King M8
stage IV

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #4 on: March 01, 2013, 09:31:46 PM »
Takes me 3-4 hours depending on how many times I take a beer break.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

CowboyBagger

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1143
  • Standing on the Corner!
    • AZ


    • CVO1: FLHXSE3 Ruby Red/Typhoon Maroon
    • CVO2: FLTRKSEANV Heritage paint
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #5 on: March 01, 2013, 10:44:28 PM »
Thanks Harry, that's some useful information

Cowboy
Logged
From an ocean tide, to an 8 second ride! Life is a ride, so make it a good one.

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #6 on: March 01, 2013, 11:52:17 PM »
No Problem, :)
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

gary_r

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #7 on: March 02, 2013, 04:29:12 AM »
Well that'll be helpful. Thanks.
Logged

FlaHeatWave

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2208

    • CVO1: '01 FXDWG2 RED 103 6sp
    • CVO2: '05 FLHTCSE2 CHERRY
    • CVO3: '09 FLTRSE3 YELLOW 117/DD7
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #8 on: March 02, 2013, 12:27:49 PM »
Quote from: Ghost__Rider on March 01, 2013, 09:31:46 PM
Takes me 3-4 hours depending on how many times I take a beer break.

Do you change the base gaskets when you lift the heads?
My tech says to do it, others say it's not necessary...
Logged
"I've read dozens of books about heros and crooks, and learned much from both of their styles"

twistedcherokee

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #9 on: March 02, 2013, 12:42:45 PM »
I did mine about 50K ago & never pulled the cylinder for the base gasket. Cometic MLS gaskets are the way to go. You may think about adjustable push rods while you are there.

  Toby
Logged
1999 Ultra Classic  95 CI, 2005 SG wheels, Fullsac TD

JKM

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 287

    • CVO1: 2008 FLHRSE4
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #10 on: March 02, 2013, 02:08:20 PM »
Should also consider changing out the lifters.  Lots of lifter failure noted in these motors, more typically around 20K miles.  I changed out my lifters for S&S when I did my cam at 5K miles and also added adjustable pushrods.  Reduced the top end noise quite a bit.

Logged
2008 FLHRSE4 (105 Anni)- V&H Dresser duals and slash cut mufflers, Big Sucker AI, PCV, Woods 777, JPrecision Heads

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #11 on: March 02, 2013, 06:14:11 PM »
I do not, never have, understood why anyone would put in HEAVY adjustable pushrods unless the were a necessity. We spent major dollars in the past for titanum push rods for the race car and seems everyone on here wants to use the adjustable one whether they need them or not. Weight is not a good thing in the valve train.
Logged

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #12 on: March 02, 2013, 08:50:09 PM »
I have never changed the base gaskets. I'm very careful to not let the jug move. while turning the engine.
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust

Sarhan

  • Still a Live
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 947


    • CVO1: FLHXSE3 Hot Citrus
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #13 on: March 03, 2013, 07:19:15 AM »
Quote from: Unbalanced on March 01, 2013, 02:47:24 PM
You can look up what book time is here :)

For example 1.8, is that means 1 day 8 hours??

Logged
A short walk is tedious when no one walks with you, but a long journey is just like a few steps, when you walk with god & caring friends

Ghost__Rider

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 610
Re: How many labor hours for a Cam/Head Gasket install?
« Reply #14 on: March 03, 2013, 08:49:47 AM »
1.8hr=1 hr & 8 tenth's of a hour. At my shop if it's over .5hr  I round it off to the next hour. Because it will take me a half hour to figure out what .8 is,  :confused5: LOL
Logged
2017 CVO SG, Suburban Speed 130" kit, Fullsac Stainless DXpipe, 2" Fullsac Cores,2014 CVO Limited, Fullsac DXpipe, Fullsac 2 1/4"CVO cores, TTS Matertune w/Fullsac Custom Map, Andrews 54 Cams. Spank You Very Much!!!
2012 Street Glide, 107cu.in./.625 T-Man cams, SE Pro CNC ported Heads, 10.8 Comp., 58mm ThrottleBody, 5.3inj, D&D Borzilla 2in1 Exhaust
Pages: [1] 2  All
« previous next »
 

Page created in 0.27 seconds with 25 queries.