Topic: Kury 24 cam installed, waiting for tune. (Read 9478 times)

bowtech40 · « **Reply #30 on:** April 17, 2013, 09:23:31 PM »

Well I got it back. I will figure out how to post a sheet, but the numbers were 115.9 hp and 122 tq. A nice flat curve too. The clutch was slipping during the final pulls, and the drive belt was way to tight. Mike told me that when I add the BDL roller lock up to the clutch and set the belt the way it should be, the numbers should jump 5-7 points. We will see, but I am happy.

Ohio phil · « **Reply #31 on:** April 20, 2013, 07:31:12 AM »

nice !!

schok · « **Reply #32 on:** April 23, 2013, 07:27:45 AM »

I would be very curious to see the dyno sheet if you figure out how to post it.

DCFIREMANN · « **Reply #33 on:** April 23, 2013, 07:33:21 AM »

Yes I would love to see it also. I am going with the Kuri 24D's in my 12 Ultra as well. I am doing a lot more to it but wanted to keep the HP and TQ lower than I normally would. I am going to do some head work as well. So I hope to get a decient riding bike out of the build. I also plan on doing a smart tune when I am finished and may go to the dyno after that.

Be Safe

THE DAWG

Author Topic: Kury 24 cam installed, waiting for tune. (Read 9478 times)

bowtech40

Re: Kury 24 cam installed, waiting for tune.

Ohio phil

Re: Kury 24 cam installed, waiting for tune.

schok

Re: Kury 24 cam installed, waiting for tune.

DCFIREMANN

Re: Kury 24 cam installed, waiting for tune.