This is a quote from Z06, who has the same set up as I have ordered:
" All they did was remove the plate mount which was between the left blinker and the left strut. Now the distance from the left blinker to the left strut and the distances from the right blinker to the right strut are identical....Not sure if I am missing something?
Actually, there is no spacer that I can see between either blinker and where they mount onto the struts..."
Can you imagine HD selling a $26000.00 Bike that has one turn signal sticking out farther than the opposite side?
It will never happen.
http://www.shopronniesharleydavidson.com/OEMpartfinder.htm Here's a hot link to All parts Manuals. Find the 2013 Breakout and look for the "Rear Turn Signals".
You will see the Left Rear Mount has a different Part Number than the Right Rear Mount.
The reason is because the left one is shorter so it has space for the License Plate Filler (that attaches the Plate Mount) to be in between the TS mount and the fender strut.
Or the Left Turn Signal Mount has the License plate mount incorporated into it. In either case if removed you will need a different Mount for that Left Rear Turn Signal for it to be equal distance from the fender strut.
Maybe this will clear this up.
Ask Z06 if the dealer returned the old parts to him after installing the Axle Mount.
If I'm correct one of those parts should be the Left Rear Turn Signal Mount. If they didn't return the parts then they swapped him for the new Left Mount they used.
Hope this helps,
Garr