Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[inferno1976]

Replaced the Heavy Breather on my 2013 CVO Road Glide and replaced it with the HD Agitator.  The throttle body cover for the heavy breather will not fit with the new Agitator.  I don't like being able to see the throttle body and the wiring harness/connection that is exposed to the rear of the breather.  Is there a cover out there that will fit with/behind the Agitator?

[Heatwave]

Replaced the Heavy Breather on my 2013 CVO Road Glide and replaced it with the HD Agitator.  The throttle body cover for the heavy breather will not fit with the new Agitator.  I don't like being able to see the throttle body and the wiring harness/connection that is exposed to the rear of the breather.  Is there a cover out there that will fit with/behind the Agitator?

Maybe this might work http://www.kuryakyn.com/products/4197/throttle-body-cover

Or this http://www.kuryakyn.com/products/1475/throttle-body-support-bracket-cover

[jr1000yarder]

I'm looking also. Any other ideas?

Someone had it do something. It's just plain ugly right now

Rich

[fastfreddy]

i seen a post were someone  used the oe one from the hevy breather. they trimed it up & drilled & taped the backing plate. it looked nice. i did a search but cant find it??

[Mr John DEUFF]

Have you seen this part:
-Chrome:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448777479&FOLDER%3C%3Efolder_id=2534374302320149&ASSORTMENT%3C%3East_id=2534374302320149&locale=en_US&bmUID=1366528860670&bmLocale=en_US
-Gloss black:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448777479&FOLDER%3C%3Efolder_id=2534374302320149&ASSORTMENT%3C%3East_id=2534374302320149&locale=en_US&bmUID=1366528860670&bmLocale=en_US

[North Star]

It's called a Servo cover.

I just ordered this one-

http://www.jpcycles.com/product/402-799

It comes in chrome or black. I like it because it looks like it just bolts on to those two empty screw holes on top, whereas the others I would have to remove the whole AC assembly to install it.

[LovemyCVOgirl]

I bought this cover off Kuryakyn to hide the wires and plastic behind my filter.  It worked with a little modification.  I like the look much better than what was there before.

[jr1000yarder]

Have you seen this part:
-Chrome:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448777479&FOLDER%3C%3Efolder_id=2534374302320149&ASSORTMENT%3C%3East_id=2534374302320149&locale=en_US&bmUID=1366528860670&bmLocale=en_US
-Gloss black:
http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448777479&FOLDER%3C%3Efolder_id=2534374302320149&ASSORTMENT%3C%3East_id=2534374302320149&locale=en_US&bmUID=1366528860670&bmLocale=en_US

I dont think that will work with the new filter.

!

[jr1000yarder]

It's called a Servo cover.

I just ordered this one-

http://www.jpcycles.com/product/402-799

It comes in chrome or black. I like it because it looks like it just bolts on to those two empty screw holes on top, whereas the others I would have to remove the whole AC assembly to install it.

Hope it works.

Snap a few photos when u get it installed.

Rich

[Charlie]

I bought this cover off Kuryakyn to hide the wires and plastic behind my filter.  It worked with a little modification.  I like the look much better than what was there before.

Looks great! what mods had to be done to make it fit?

[LovemyCVOgirl]

 

Looks great! what mods had to be done to make it fit?

I believe my mechanic said that he had to modify one of the bolt holes so it would line up.

[North Georgia Hawg]

I used the H-D cover for the Heavy Breather behind the Ness Big Sucker 2. I just Dremeled away a lot of bits that were in the way until the a/c fit sung against everything. I had to cut away the entire top lip at the front to fit behind the Big Sucker plate, but i was able to keep the nice chrome curved top to cover up the top area.

Same technique would probably work with the Agitator.

[LovemyCVOgirl]

I used the H-D cover for the Heavy Breather behind the Ness Big Sucker 2. I just Dremeled away a lot of bits that were in the way until the a/c fit sung against everything. I had to cut away the entire top lip at the front to fit behind the Big Sucker plate, but i was able to keep the nice chrome curved top to cover up the top area.

Same technique would probably work with the Agitator.

We are so smart Ken!   

[SE66]

This is what you are looking for.  I did exactly what was displayed here and it turned out Great

http://www.cvoharley.com/smf/index.php?topic=79849.0;all

[inferno1976]

Ok, found what I was looking for with no need for any alterations.  Kuryakyn - Chrome #8657 / Black - #7244
Thanks for the responses.