Topic: Ness Stage 1 filter issue w/ tear drop cover. (Read 2482 times)

kobi04sed · « **on:** September 30, 2006, 03:19:15 PM »

Just installed the Ness air filter kit and having issues with the tear drop cover hitting the bolt holding the back plate to the front head. Anyone have issues here?? I would like to keep the SE tear drop cover. If I add a 1/8" washer to the cover it holds it away, but the cover is not held firm to the filter rubber. Thoughts?? Thanks, Kurt

SEULTRA · « **Reply #1 on:** September 30, 2006, 03:35:14 PM »

Thicker gasket between the filter & cover? [smiley=nixweiss.gif] [smiley=xyxthumbs.gif]

grc · « **Reply #2 on:** September 30, 2006, 04:39:27 PM »

Kurt,

As SEULTRA suggested, a thicker gasket on the filter along with your 1/8" washer should do the trick. Try some self-stick closed cell foam weatherstripping from a hardware store, approximately 5/16" to 3/8" wide and 1/4" thick. You will need the harder version, not the easily compressed stuff. Just stick the weatherstrip material to the existing gasket.

Jerry

Author Topic: Ness Stage 1 filter issue w/ tear drop cover. (Read 2482 times)

kobi04sed

Ness Stage 1 filter issue w/ tear drop cover.

SEULTRA

Re: Ness Stage 1 filter issue w/ tear drop cover.

grc

Re: Ness Stage 1 filter issue w/ tear drop cover.