Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Rio]

Anyone have any luck figuring out how to wire it and get it to work with a Liftmaster garage door opener?  I was told by a friend of mine that it's not compatable because of the technology Liftmaster uses.  Theres no way to wire it to the opener?

[grc]

Anyone have any luck figuring out how to wire it and get it to work with a Liftmaster garage door opener?  I was told by a friend of mine that it's not compatable because of the technology Liftmaster uses.  Theres no way to wire it to the opener?

Someone just recently (past month or so?) posted a photo of how he soldered the wires to the control panel to make his work.  Try a search restricted to the past 60 days to see if you can find it.

Jerry


Here you go, try this one:    http://www.cvoharley.com/smf/index.php?topic=74206.msg1125546#msg1125546

[Fireguy]

This is what I did.

http://www.cvoharley.com/smf/index.php?topic=75192.msg1103109#msg1103109

[Arctic John]

I had the same issue....spoke with the liftmaster company and they told me it will NOT work, no way no how.  So I went back to the old method...install a trip switch(I think it's "Autoswitch" or something similar) on the headlight switch with a remote inside of the fairing.  Now it works well.....

[cold1]

I had the Problem where H.D door opener would not work with lift master. Solution disconnect digital smart inside & try old door bell type, to test take ground wire off digital at motor, try wires on simple controller.takes less than 10 min. CHEERS

[3mcam]

I connected it to the same connections as the push button(doorbell) switch. No problems.

[anglia48]

When I was in Arizona this spring at bike week, I purchased a remote opener from Brake It Up. Plugged the unit in under the seat of my 2013 RG and programmed it like the instruction said and it works perfectly. 3 pulled of the brake lever and the door opens or closes. No issues.