www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: MAP NEEDED FOR 07  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

CPRKING

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
  • FLHRSEI.ORG
MAP NEEDED FOR 07
« on: October 03, 2006, 07:04:17 PM »
Couldn't wait for the Thunder Max so I am putting on a SERT.  We have no dyno tuners in my area.  All I'm doing at first is putting on a K&N Filter (Called to order the Zipper Air Filter and was told it would not fit with my stock SE Road King Cover -- that I would have to go with the football shaped cover).  I'm staying with the stock cover that is why I'm going with K&N Filter.  I have the Vance & Hines true dual headpipes and I'm going with the Vance & Hines Oval Slip-ons.  Any help would be greatly appreciated with MAP information.  I hope to have the bike dyno tuned later this year.  Just need something to get me going.  Thanks, Bud
Logged

ace4059

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 320
  • FLHRSEI.ORG
Re: MAP NEEDED FOR 07
« Reply #1 on: October 03, 2006, 07:25:08 PM »
HD recommends configuration#84 for the 110" motor w/ Stage I A/C and "race" mufflers. I put the V&H ovals on my SE Ultra and it runs great with this set-up.
Logged
There are no traffic jams along the extra mile.- Roger Staubach.

Flying Ace

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 348
  • IBA#10357

    • CVO1: 2021 FLHTKSE
Re: MAP NEEDED FOR 07
« Reply #2 on: October 03, 2006, 07:32:46 PM »
Quote
HD recommends configuration#84 for the 110" motor w/ Stage I A/C and "race" mufflers. I put the V&H ovals on my SE Ultra and it runs great with this set-up.

Stock headers?  I have the V&H true duals and Oval mufflers, wondering how close #84 will be.
Logged
2021
CVO Limited

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: MAP NEEDED FOR 07
« Reply #3 on: October 03, 2006, 07:51:46 PM »
Flying I posted a semi long reply to your question in twin cam forum..
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

copout221

  • Still Shopping !
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 454

    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2010 FLHTCUSE5
    • Taillight Solutions
Re: MAP NEEDED FOR 07
« Reply #4 on: October 05, 2006, 11:01:53 PM »
Quote
HD recommends configuration#84 for the 110" motor w/ Stage I A/C and "race" mufflers. I put the V&H ovals on my SE Ultra and it runs great with this set-up.

I am using the same map until I can get a dyno-tune completed. The only problem I have noticed is excessive backfiring around 2 -2.5k rpm's on decel. I need to tweak the map a bit to eliminate it. Otherwise, it is a great map for what I currently have.
Logged

DanR

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: 2005 FLSTFSE BLUE
Re: MAP NEEDED FOR 07
« Reply #5 on: October 06, 2006, 11:16:11 PM »
Quote
Couldn't wait for the Thunder Max so I am putting on a SERT.  We have no dyno tuners in my area.  All I'm doing at first is putting on a K&N Filter (Called to order the Zipper Air Filter and was told it would not fit with my stock SE Road King Cover -- that I would have to go with the football shaped cover).  I'm staying with the stock cover that is why I'm going with K&N Filter.  I have the Vance & Hines true dual headpipes and I'm going with the Vance & Hines Oval Slip-ons.  Any help would be greatly appreciated with MAP information.  I hope to have the bike dyno tuned later this year.  Just need something to get me going.  Thanks, Bud


I am running the SERT, Big Sucker air filter, and Vance & Hines Classic slip ons. I started out with map #84 but found it was still very lean. Email me and I will send you my modified map. My email address is TOC-Systems@woh.rr.com
Logged

copout221

  • Still Shopping !
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 454

    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2010 FLHTCUSE5
    • Taillight Solutions
Re: MAP NEEDED FOR 07
« Reply #6 on: October 07, 2006, 12:15:33 AM »
Quote


I am running the SERT, Big Sucker air filter, and Vance & Hines Classic slip ons. I started out with map #84 but found it was still very lean. Email me and I will send you my modified map. My email address is TOC-Systems@woh.rr.com

HOGIT,
         I also sent you an email for a copy. I would really like to try it compared to #84. What else did you modify / adjust other than fuel values ? Thanks
Logged

DanR

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: 2005 FLSTFSE BLUE
Re: MAP NEEDED FOR 07
« Reply #7 on: October 07, 2006, 06:47:18 AM »
Quote

HOGIT,
         I also sent you an email for a copy. I would really like to try it compared to #84. What else did you modify / adjust other than fuel values ? Thanks


I sent you a copy of the map. Basically just increased fuel.  I have been running this map for approx. 700 miles and my bike runs much better. Don't get the popping and the plugs have a slight tannish color to them.

Hogit
« Last Edit: October 07, 2006, 06:48:08 AM by DanR »
Logged
 

Page created in 0.122 seconds with 21 queries.