Hello, the HD super tuner will have no problems with connecting on to the breakout the Electronics on ll bikes are the same ,
the problem is your Dealer
. Probably there is no off the shelf fuel mapping available for the KessTech ESM2 exhaust, so he
has to do the tuning on a Dyno or by riding the bike andadjusting the fuelmap / timing etc.
This means that he has to use his brains
, and this is something that is probably not available in his shop.
Installing an of the shelf mapping is tuning your bike for 90% right, the rest has to be done with "fine tuning"
So it is better to go to a specialist with a "dyno" in his shop who does this for a living, as to go to your dealer who is doing
this once a year and only installs a of the shelf program and tells you it is fine.
You can also chose the Dynojet Powervision tuner there are several dealers in germany see below for the site
when you take this tuner you can install the additional auto tune box and tune your bike "on the fly" every time you change something.
here is the link
http://www.dynojet-powervision.de/