I am going into the cam chest on my '02FLHRSEI soon and wanted to get all the smalls lined up before I go in. I have the model specific parts book (99428-02) and think they have a missing o-ring on the cam chest IPB (pg14) and/or missed the count in the list (pg15).
The illustration shows part 11 near the spot in question and lists only 1 required, that is if it is what I am looking for?
I have the service manual 99483-02, on page 3-51 step 14 tells us to remove 2 O-rings that appear to be the same. One of which is labeled as P/N11301. Then in step 15 we remove two more, one from the pick up spigot P/N11293 and the other from the outboard side P/N 11286. See fig 3-44
Are these two O-rings on the left at the blind hole (missing in the IPB) and the oil feed hole exactly the same. We see further in the service manual, Fig 3-98, the artwork shows both, but in the parts book it does not.
Can anyone verify the part number for the unlisted o-ring?
Author
Topic: Missing O-Ring (Read 1020 times)