Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[brosen101]

I used the tag bracket hanging on the shelf at Harley. It is an assesory tag bracket for SGs. I then ordered the small light assembly that goes under our binker assembly. It is exactly the same as a 2013 SG. When you look at it you will notice they are the same.

Is it p/n 6790008 on the HD site?  Wasn't sure what the small light assembly is under the blinker assy...

[brosen101]

you can move that emblem down. I did it before i changed my entire fender. Fishing line to get it off then 3M tape to relocate it. You can barely see the rescess hole as well

I think I can live with this...perfect, thank you.

[Pete7539]

here's another solution. I used this one-- http://firemanjoesmc.com/license_plate_brackets_and_frames.html

That one is purty, but I needed my plate illuminated to be legit in my state. The native custom with an LED illuminated chrome plate holder together came in at 120

[GeogiaCVOrider]

Brosen101 This is the correct part number 67900056. If you look under your blinker bar you will see two mount holes for the lens and light assembly. This is the same light assembly used on the 2013s I think. Have your Harley parts guy pull up a picture of that area for a street glide. You will see the lens and light assembly. There is a plug for it to plug right into when you take the tail light lens off.

Plug N Play / ready to go.

The only other thing, If you want to get picky, you can change the tail light lens so it doesn't have the clear window on top. This is the window that use to light up the tag in the old location. I left mine on because I just changed to an LED tail light a few months earlier.

[brosen101]

Brosen101 This is the correct part number 67900056. If you look under your blinker bar you will see two mount holes for the lens and light assembly. This is the same light assembly used on the 2013s I think. Have your Harley parts guy pull up a picture of that area for a street glide. You will see the lens and light assembly. There is a plug for it to plug right into when you take the tail light lens off.

Plug N Play / ready to go.

The only other thing, If you want to get picky, you can change the tail light lens so it doesn't have the clear window on top. This is the window that use to light up the tag in the old location. I left mine on because I just changed to an LED tail light a few months earlier.

Thank you sir!