Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 07 SERK wheel and Rotor  (Read 1007 times)

0 Members and 1 Guest are viewing this topic.

e4seter

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 165
07 SERK wheel and Rotor
« on: October 23, 2006, 07:45:21 PM »

Just doing a sanity check.  Have any of you with a 2007 SERK noticed that the rear wheel is not centered in the rear fender?

Also,  is your rear brake rotor just a stock, non floating or chrome, Brake rotor?

My rear wheel has only about 1/4 inch clearance on the left and almost an inch clearance on the right to the rear fender.

TIA
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Online Online
  • Posts: 32650
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: 07 SERK wheel and Rotor
« Reply #1 on: October 23, 2006, 07:56:04 PM »

Quote
......

Also,
« Last Edit: October 23, 2006, 07:56:50 PM by flhtcse2004 »
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

e4seter

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 165
Re: 07 SERK wheel and Rotor
« Reply #2 on: October 23, 2006, 08:09:16 PM »

Quote
It has been noticed that starting with the '06 CUSE's (seems that anything w/bags might have this) that the rear brake was stock non-floating/chrome.

thank you,  HD is getting cheap.  Sheeech
Logged
 

Page created in 0.236 seconds with 25 queries.