www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: '12 FLHXSE3 Hydraulic Clutch Squeek  (Read 1706 times)

0 Members and 1 Guest are viewing this topic.

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
'12 FLHXSE3 Hydraulic Clutch Squeek
« on: August 25, 2013, 10:10:31 AM »
My clutch squeaks when I pull it in about the first 1/4" or so. It's coming from the master cylinder. Any one seen this?  :nixweiss:
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High

North Georgia Hawg

  • HoneyBadger Don't Care...
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3345
  • I HATE WINTER!!!
    • GA


    • CVO1: 2012 CVO Street Glide FLHXSE3 Hot Citrus/Antique Gunstock
    • CVO2: 2022 C8 Corvette HTC Amplify Orange
    • CVO3: 2009 Chevy Avalanche LTZ Inferno Orange
Re: '12 FLHXSE3 Hydraulic Clutch Squeek
« Reply #1 on: August 25, 2013, 11:40:19 AM »
Quote from: Jswerve on August 25, 2013, 10:10:31 AM
My clutch squeaks when I pull it in about the first 1/4" or so. It's coming from the master cylinder. Any one seen this?  :nixweiss:

Mine had started to squeak too. I just sprayed a little touch of Aero-Kroil lubricating oil on the pivot bolt, let in penetrate down, and no more squeak! I did it to my brake lever too, even though it wasn't squeaking. Any penetrating  oil would probably do... even WD-40.

Ken
Logged

HoneyBadger Don't Care...

Cobra PowerPort headers | 4" Rineharts | RedShift 587 cams | Feuling HP+ cam plate/oil pump/pushrods/lifters
Cometic MLS .030" gaskets | Big Sucker Stage 2 | Energy One extra plate clutch pack | Hayden BT07 | ClutchWIZ
TL P7 LEDs/Aux | Color-Matched Tour Pak | Wild Ones 575 bars | RT 665 GPS
Corbin DualTour seat | BAH Flush Front Axle

Jswerve

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4150

    • CVO1: 2012 FLHXSE3
Re: '12 FLHXSE3 Hydraulic Clutch Squeek
« Reply #2 on: August 26, 2013, 05:48:17 AM »
Quote from: North Georgia Hawg on August 25, 2013, 11:40:19 AM
Mine had started to squeak too. I just sprayed a little touch of Aero-Kroil lubricating oil on the pivot bolt, let in penetrate down, and no more squeak! I did it to my brake lever too, even though it wasn't squeaking. Any penetrating  oil would probably do... even WD-40.

Ken
I'll try that, thanks Ken
Logged


2012 FLHXSE3 Ruby Red/Typhoon Maroon
|Color Matched Detachable Tour Pak | Fuelmoto PV | Dragos 580 cams | Dragula 2-1/Ghost Pipe | Cyclesmith 13's | Sachs heads | Yaffe Stealth III License Plate Frame| Long Angled High
 

Page created in 0.219 seconds with 20 queries.