Topic: Bike quits.............Need to "Debug" this problem (Read 3461 times)

GMR-PERFORMANCE · « **Reply #15 on:** November 19, 2013, 08:24:35 AM »

By chance does that bike have a cam sensor,... 02 was some what of a cross over year I have seen them both ways. Common failure item and does what you are talking about. Heat the bike up let it sit.

Fuel is a simple one but if a part like the petcock fails that is not something that comes and goes.. Vapor lock maybe by chance is the MIK carb hitting the cylinder fin this is common.. I wonder if the bowl is touching is the heat being transfered into the carb and evaporating the fuel. That still seems like a long shor though. As that is more a hard re start and once running it will keep running.

moscooter · « **Reply #16 on:** November 19, 2013, 03:05:52 PM »

He is taking the bike in to have the carb removed and cleaned up. we will see how all this goes as to fixing the problem.

cahdbiker · « **Reply #17 on:** November 19, 2013, 04:14:12 PM »

moscooter, my 95 Heritage had the fuel petcock with the vacuum. The first time the bike gave me a problem was about a year after I bought it. Doing about 80MPH in the fast lane and just died. Pulled in the clutch got over to the side and coasted to a stop. Flicked the petcock from open to close a couple of times and it started right up. Ironically when I received the mail that day there was a recall notice from Harley for the petcock. I took it in and had a pingle installed without the vacuum line. No fuel delivery problems after that.CAHDBIKER

Author Topic: Bike quits.............Need to "Debug" this problem (Read 3461 times)

GMR-PERFORMANCE

Re: Bike quits.............Need to "Debug" this problem

moscooter

Re: Bike quits.............Need to "Debug" this problem

cahdbiker

Re: Bike quits.............Need to "Debug" this problem