www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Changing Rear Wheel Pulley Again but will Belt Still Fit?  (Read 3148 times)

0 Members and 1 Guest are viewing this topic.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1219
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Changing Rear Wheel Pulley Again but will Belt Still Fit?
« on: November 25, 2013, 04:11:20 PM »
A long time ago I changed my Transmission Pulley from a 32 to a 30 and rear wheel pulley from 65 to 68 tooth. Stock belt was 133 and I installed a 135 tooth a 6 speed .86 OD gearset. Now I want to install a 65 tooth rear wheel pulley. Quiestion is this.
  The belt was 133 changed to 135 tooth. The rear pulley is now 65 tooth stock. The transmission pulley is 30 not the stock 32. The front  pulley is 2 teeth less and the belt has two extra teeth. The rear axle is in the center of the swinga arm adjustment. will it still work? Two teeth on belt will move the axle to the rear but how much? Am I looking at this wrong? Thanks for any input Guys
Logged

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1219
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #1 on: November 25, 2013, 04:27:46 PM »
What I mean to say is with the 30/68 ratio the axle is in the middle of the swingarm. So going to the 65 tooth  will move the axle rear how far? Will there be enough in ths slot or do I need to change the belt again?
Logged

RayG

  • "What the hell was I thinking?"
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 928

    • CVO1: 2008 FLHRSE4
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #2 on: November 26, 2013, 10:52:37 AM »
Without sounding stupid on my part is it possible to make a mock up?  I'm just taking a guess here but depending on having the parts available and not installed I would think it could be done and still be very accurate. 
Logged

RayG

  • "What the hell was I thinking?"
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 928

    • CVO1: 2008 FLHRSE4
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #3 on: November 26, 2013, 10:58:27 AM »
I messed up my post here, this was supposed to be a reply for the sprocket & belt fitment.  Sorry about the confusion.  Hopefully this can be removed. 
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #4 on: November 26, 2013, 11:33:45 AM »
Quote from: RayG on November 26, 2013, 10:58:27 AM
I messed up my post here, this was supposed to be a reply for the sprocket & belt fitment.  Sorry about the confusion.  Hopefully this can be removed. 
I think I have put it in the right place :nixweiss:... if that is not correct you can delete your posts yourself.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1219
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #5 on: November 28, 2013, 11:59:15 PM »
The other day I was out riding and there was a loud bang. I hit  a small 6"x2" flat peice of steel. the front tire threw it into the frame, putting a small dent at the mid peg mounts and took a chunk out of the outermost side of the rear pulley and it damaged the belt. Odd that this happened as I was wanting to change the pulley anyway.
My wife thinks I damaged it on purpose. I woulld never hurt my bike intentionally. I love her. My wife is jealous of it. So now i really do have to change the pulley and belt.
stock belt is 133 tooth with 32/65 gearing now it will have30/65 gearing. 2 teeth less than stock on transmission,What belt size do I need? With the old stock 32/65 the rear axle was about 1/4" from being all the way forward. with 30/65 gearing
Thanks
Logged

CVO2FIXUP

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1707
  • Canada Eh!!!
    • ON


    • CVO1: 2010 CVO Ultra Classic Riptide Blue.
Re: Changing Rear Wheel Pulley Again but will Belt Still Fit?
« Reply #6 on: November 29, 2013, 06:45:43 PM »
 Man I can tell you stories about the wife and the bike conflicts. Some times I think it is a totally different person in front of me. Just have to stay the coarse and not give in.  ::)

 Just got the trip to Daytona approved, that was harry to say the least. Cheers.
Logged
I may be a head of cabbage, but I am ahead of you!!
 

Page created in 0.214 seconds with 20 queries.