Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sol y sombra]

Hi, i am going to install PYMB 12" and i would like to know how to change the brake line without disturbing the abs??

[sol y sombra]

Or how do i have to bleed the abs incase of
Thanks guy's

[05Train]

You'll be disconnecting the line between the reservoir and the ABS controller, so air's going to get in there.  You can mitigate that by gravity bleeding the MC, but chances are you'll still get some air into the controller.  Do a standard bleed and see how it feels.  If it doesn't feel right, your local dealer should be willing to hook it up to the DT and bleed it for 1/2 hour's labor.

[sol y sombra]

Help wanted
my apology for my bad english
Anyone tips or trucs or pictures on changing de brake line to the abs module without getting air into the abs module?? Any sugestion is welcome
Thanks

[Jswerve]

Help wanted
my apology for my bad english
Anyone tips or trucs or pictures on changing de brake line to the abs module without getting air into the abs module?? Any sugestion is welcome
Thanks

I think ppl over think this. Let me tell you what I did. I sucked all of the fluid out of the master cylinder, removed the line (being careful not to get any DOT 4 on my paint), then installed the new line. Next I hooked up a vacuum bleeder to the right side front brake caliper and sucked fluid through watching for bubbles and keeping the master cylinder from running dry. After draining the master cylinder about 3 times I simply pumped the lever and opened the bleeder like a normal brake bleed. Did this about 3 or 4 times. My ABS light goes out over 3mph like from the factory and the brakes work wonderful. Really not hard at all...