www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4  All

Author Topic: Reflector Insert for 2014 Baggers  (Read 7927 times)

0 Members and 1 Guest are viewing this topic.

cambo

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1130

    • CVO1: 2013 CVO Breakout
    • CVO2: 2015 Ultra Limited
Re: Reflector Insert for 2014 Baggers
« Reply #30 on: April 25, 2014, 04:32:41 PM »
If you can send me the drawing for the outline of the piece I'll see what i can do to create the rest of the drawing in the formats you mentioned.

Screamin Eagle would be less of a niche than CVO as I have seen a lot of bikes that install some SE parts on otherwise non-SE engines but the CVO designation is specific to what HD manufactures. (OK - let me be honest and admit that I'm just trying to talk you into this one! ;D )

Cam
Logged

gadgetz

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1584
    • MS


    • CVO1: FLTRSE3 - Electric Orange & Vivid Black w/ Ghost Feather Graphics - Road Pig
Re: Reflector Insert for 2014 Baggers
« Reply #31 on: April 25, 2014, 05:24:23 PM »
Quote from: camcvo on April 25, 2014, 04:07:17 PM
As a fan of the Screamin Eagle graphics on the RG fairing, I was wondering if the graphic below is possible.

Cam


That's sweet!  Nice design Cam    :2vrolijk_21:   I'd buy a set of those.
Logged
Charter Member Critter Gawking Society - Got Goat?

Steve Cole

  • Manufacturer TTS
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1430
Re: Reflector Insert for 2014 Baggers
« Reply #32 on: April 25, 2014, 06:43:24 PM »
If these are not too thick I would not waste the time to waterJet them. Depending on how thick you can run a small "V" shaped tool around them just as fast on a CNC while doing the rest of the machining and then just break them apart. This requires a small amount of time to hand finish the edges but your going to have to do that anyway to polish the edges. Be very careful about using a SE logo as HD will come after you for it. Then, if they see them selling well, they will R&D (ripoff and duplicate) them!
Logged
The Best you know, is the Best you've had........ not necessarily the Best.

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Reflector Insert for 2014 Baggers
« Reply #33 on: April 25, 2014, 06:56:00 PM »
Quote from: Steve Cole on April 25, 2014, 06:43:24 PM
If these are not too thick I would not waste the time to waterJet them. Depending on how thick you can run a small "V" shaped tool around them just as fast on a CNC while doing the rest of the machining and then just break them apart. This requires a small amount of time to hand finish the edges but your going to have to do that anyway to polish the edges. Be very careful about using a SE logo as HD will come after you for it. Then, if they see them selling well, they will R&D (ripoff and duplicate) them!
:ROFLOL: That is too funny (and true)... first time I've heard that saying and will definitely remember it. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

cambo

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1130

    • CVO1: 2013 CVO Breakout
    • CVO2: 2015 Ultra Limited
Re: Reflector Insert for 2014 Baggers
« Reply #34 on: April 25, 2014, 07:02:13 PM »
Quote from: Steve Cole on April 25, 2014, 06:43:24 PM
Be very careful about using a SE logo as HD will come after you for it.

We can design it so that it is very close but not quite the same. :D If there is enough folks who would like the SE I can get to work and post a couple different versions to choose from.
Logged

WestCoastRuss

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2290
    • CA


    • CVO1: 2010 FLHXSE Tequila Sunrise
    • CVO2: 2014 FXSBSE Sedona Sand
Re: Reflector Insert for 2014 Baggers
« Reply #35 on: April 25, 2014, 07:25:34 PM »
I like both of the designs....the CVO and the Screamin' Eagle.  I am envious of you artistic guys.....
I have a hard enough time drawing a breath..... :nervous:
Logged
Tequila makes her clothes fall off....

Billy

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 738
  • FLHRSEI.ORG

    • CVO1: 2007 SERK
    • CVO2: 2014 SERK
Re: Reflector Insert for 2014 Baggers
« Reply #36 on: April 25, 2014, 08:45:46 PM »
I like the CVO  Billy
Logged
2014 SERK Tribal Orange Wild one 501 apes Powder coated gloss black, Mustang Seat with backrest, King tour pack with smoked lights, LED aux lights, CD Dynamic front ringz, CD custom license plate with LED turns and brake light, Zumo 660 mounted on bar, Klock Werks 17 inch Flare windshield, Saddle bag guards, Added LED turn indicators in handle bar cover, Engine guard foot pegs

OBB

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5320
  • aka Ohiobellboy
    • OH


    • CVO1: 2011 Slate/Black SERGU** traded
    • CVO2: 2015 Double Blue SERGU
    • CVO3: 2012 SERG Blue
Re: Reflector Insert for 2014 Baggers
« Reply #37 on: April 25, 2014, 09:05:42 PM »
Quote from: Steve Cole on April 25, 2014, 06:43:24 PM
..... Be very careful about using a SE logo as HD will come after you for it. Then, if they see them selling well, they will R&D (ripoff and duplicate) them!
You just have to modify the image a little  :vrolijk_5:
Logged
PHOTOBUCKET IS HOLDING MY PIX HOSTAGE!!!

Steve Cole

  • Manufacturer TTS
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1430
Re: Reflector Insert for 2014 Baggers
« Reply #38 on: April 25, 2014, 09:17:45 PM »
Just be prepared for them up front. Doc1 here on the forum learned the hard way as his shop name was HDMD and they came after him for that. So you either step up with the dollars to fight them or change. Then they come in with there R&D and I have had them do that to me first hand!
Logged
The Best you know, is the Best you've had........ not necessarily the Best.

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Reflector Insert for 2014 Baggers
« Reply #39 on: April 25, 2014, 09:28:16 PM »
Quote from: Steve Cole on April 25, 2014, 09:17:45 PM
Just be prepared for them up front. Doc1 here on the forum learned the hard way as his shop name was HDMD and they came after him for that. So you either step up with the dollars to fight them or change. Then they come in with there R&D and I have had them do that to me first hand!
Sad part of that is he probably was more of a "MD" for "HD" than could be found at most of the places that have "HD" in their name. it is a shame that you find those that are more passionate about "HD" outside of the confines of those that carry "HD" under the "MoCO" banner (disclaimer: not all... but more than it should be).

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

2k

  • My ignorance is just as good as your knowledge, when my information changes, I alter my conclusions
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7996
  • monter le cheval de fer (French)
    • NC


    • CVO1: 2013 SERK-Dressed in BLUE of course.
    • CVO2: 2002 Supercharged HD F150 512 RWHP
    • CVO3: 1956 BelAir Sports Coupe
Re: Reflector Insert for 2014 Baggers
« Reply #40 on: April 25, 2014, 10:18:33 PM »
I'm up for any design.....but like Haird said, I don't own a '14
Logged
Most Honda Goldwing riders will blink when hit in the head  with a ball-peen hammer (sans helmet)

Mano

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4381
    • ON


    • CVO1: 2011 FLHXSE2
Re: Reflector Insert for 2014 Baggers
« Reply #41 on: April 27, 2014, 09:08:26 PM »
I love the CVO design and would buy them too but I don't own a 14 ether. :(
Logged

Eagle Eye

  • THE EAGLE HAS LANDED!
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1445
  • Every day is a great day to ride!

    • CVO1: 2007 FLHTCUE2 Ultra Classic - Light Candy Cherry and Black Ice
Re: Reflector Insert for 2014 Baggers
« Reply #42 on: April 27, 2014, 10:34:30 PM »
Anything like this for 07 Ultras?


Sent from my iPhone using Tapatalk
Logged
Ken2
Vietnam Vet
Spec-5
Medic
US Army

dnlpnd

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 179
  • "Life is hard; it's harder if you're stupid."~J.W.
    • IA


    • CVO1: 2014 FLHRSE6
Re: Reflector Insert for 2014 Baggers
« Reply #43 on: April 28, 2014, 03:17:13 PM »
Quote from: Haird on April 25, 2014, 11:08:31 AM
I know you are designing for 2014 and beyond but I would be interested in a set designed for pre '14 scooters as Ginger would look good with these attached (my '12 SESG).  I'm not that impressed with what anybody has so far purposed for our bikes in the reflector area on the bags.  That's the main reason I haven't changed it yet.

No.  These reflector insert were designed specifically for the newly redesigned bags on the 2014s and newer, until Harley changes them again.  It’s a shame there are not more options out there for the pre-2014 bikes.  The older latch inserts would be so much easier to make since the shape is a parallelogram and flat.  These new reflector inserts are keeping me plenty busy and with riding season ramping up, there are no plans to retro the design.  Sorry, dnlpnd
Logged
SE Drop-On 117
SE Hi-Cap Oil Pan
SE Hi-Vol Oil Pump
SE Cam Plate
SE Adj Pushrods
SE Pro 58mm TB
SE 5.3 Injectors
SE Hvy Brthr Elite
Dynojet PV2
Dynojet TT-5X
Jackpot 2-1-2 SS
Jackpot Full X-over
Paul Yaffe Monsta 45s
GMR 600 Cams
S&S Prem Tappets
Ward's CNC Ported 110 Heads
AV&V Valve Springs
Cometic .027 HG
Red Shift Dual Piston Tensioner
Axtell Oil Bypass Valve
AIM Clutch Springs
10.8:1, 132ft-lb, 126hp SAE

dnlpnd

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 179
  • "Life is hard; it's harder if you're stupid."~J.W.
    • IA


    • CVO1: 2014 FLHRSE6
Re: Reflector Insert for 2014 Baggers
« Reply #44 on: April 28, 2014, 03:17:56 PM »
Quote from: 2k on April 25, 2014, 10:18:33 PM
I'm up for any design.....but like Haird said, I don't own a '14

No.  These reflector insert were designed specifically for the newly redesigned bags on the 2014s and newer, until Harley changes them again.  It’s a shame there are not more options out there for the pre-2014 bikes.  The older latch inserts would be so much easier to make since the shape is a parallelogram and flat.  These new reflector inserts are keeping me plenty busy and with riding season ramping up, there are no plans to retro the design.  Sorry, dnlpnd
Logged
SE Drop-On 117
SE Hi-Cap Oil Pan
SE Hi-Vol Oil Pump
SE Cam Plate
SE Adj Pushrods
SE Pro 58mm TB
SE 5.3 Injectors
SE Hvy Brthr Elite
Dynojet PV2
Dynojet TT-5X
Jackpot 2-1-2 SS
Jackpot Full X-over
Paul Yaffe Monsta 45s
GMR 600 Cams
S&S Prem Tappets
Ward's CNC Ported 110 Heads
AV&V Valve Springs
Cometic .027 HG
Red Shift Dual Piston Tensioner
Axtell Oil Bypass Valve
AIM Clutch Springs
10.8:1, 132ft-lb, 126hp SAE
Pages: 1 2 [3] 4  All
« previous next »
 

Page created in 0.222 seconds with 21 queries.