Could have at least let me finish before you moved it.
So - the ride.
They had 5 bikes for an every half hour group ride. Turned out to be a 25 minute ride in the heart of Manhattan. So not much of a real ride.
But, in two words - freakin awesome !
The pre ride instructions included, no running red lights, no wheelies, no endos and if you drop it - leave it - the factory types would pick it up.
We were each given HD's new lightweight riding jacket to wear. These new jackets have all the regular piping replaced with a red LED piping.
The handlebar controls look like standard HD items except there is no clutch lever. No shifter either.
The mirror placement sucked
What is normally the ignition button on our bikes turns the bike on.
Once on the "start" button sets the programing to run. Don't know what it is, but once in run mode there is a barely audible whir and vibration as if the motor is already running.
The slightest throttle roll has you moving.
The bike feels, fits and handles about like an 883 Sporty. Kind of looks like a cross between the Sporty and a V-Rod
It accelerates like nothing I have ridden. Two power modes, economy and power. We were locked in the economy mode.
The specs list it as being able to go from 0-60 in under 4 seconds and I have no doubt about that. Twist the throttle on this thing and you better be hanging on.
For our ride around the city I had a few chances to open up the gap to 100+ feet and roll on the throttle. Seamless, linear and the Star Wars whine.
Stopping - for the most part I did not need to touch the brakes. Backing off the throttle will bring you to a dead stop. When stopped and rolling the bike back and forth you could feel resistance. Regenerative braking is on 100% of the time, even at a stop.
it was also recommended during the pre ride that because the re-gen braking was so effective that it would be wise to still use the brakes to let the rider behind you know.
I did not get to ask the engineers, but when rolling on the throttle hard, there was a kind of unique noise that sounded like the belt trying to climb out of the sprocket.

I want one

After the ride we got to participate in a lengthy interview (only if you wanted) to get our take. Most of the people I talked, met with were Milwaukee types. The one engineer there was the programmer for the electronics.
There were probably 6 or so bikes in the dealer and another 6 outside for the road test.
All in all an exciting experience. Not to often the common folk can get involved in a real "prototype" type of event. There is plenty of work to be done before we see this on the showroom floor, but I'm looking forward to it.